Georg Fischer ABS 10bar Diaphragm Valve, 29.514.510 11/4

  • RS Stock No. 742-2781
  • Mfr. Part No. 29.514.510 11/4
  • Manufacturer Georg Fischer
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): CH
Product Details

Type 514 ABS Diaphragm Valves

Type 514 are a new generation of ABS diaphragm valves with solvent cement sockets from GF Piping Systems, It sets new standards regarding safety, efficiency and simplicity.
Instead of the commonly used four metal screws it has a central union nut - this non-corrosive connection is characterised by homogeneous temperature behaviour, an even surface pressure and high pressure rating up to 16 bar. The optimal flow geometry offers double flow with same energy expenditure. With almost linear flow characteristics this guarantees stable processes.
Beyond that the weir of the branched valve has been moved directly to the pipe wall of the main line. Therefore dead leg was reduced to an absolute minimum and thus the hygiene was increased at the same time.
Standard equipment like a lockable handwheel, a two-coloured indicator and an interface for a self-adjusting limit switch set new standards in terms of user-friendliness.

Fields of Application:
Chemical Process Industry
Life Science
Microelectronics
Water Treatment
Food and Beverage
Measurement and Control
Applications with high viscosity and solid content

Double flow rate compared to predecessor
One housing nut replaces four screws compared to predecessor
Handwheel with built-in locking mechanism
For easy installation and removal
Short overall length

Diaphragm Valves - PVC-U and ABS

10 bar Working Pressure at 20°C.,Hand wheel controlled, EPDM Diaphragm, M6 thread mounting hole.

Specifications
Attribute Value
Attachment Type Socket
Pipe Diameter 2in
Body Material ABS
Connection 1-1/4 in Socket
Pressure Rating 10bar
Flow Factor Kv 759L/min
Maximum Operating Temperature +60°C
Minimum Operating Temperature -40°C
Operating Temperature Range -40 → +60 °C
Temporarily out of stock - back order for despatch 01-10-2020, delivery within 2 working days
Unit of sale: Each
136.28
(exc. VAT)
164.90
(inc. VAT)
units
Per unit
1 - 4
€136.28
5 +
€132.07
Related Products
Speedfit® valves, connectors and couplers, made from Acetal ...
Description:
Speedfit® valves, connectors and couplers, made from Acetal and suitable for hot and cold water systems operating up to 65°C May be used with 15mm copper or polyethylene pipe. Maximum working pressures are 12 bar at 20°C and 6 bar ...
The NABIC 3bar 1/2in BSP female pressure relief ...
Description:
The NABIC 3bar 1/2in BSP female pressure relief valve is designed for the protection of hot water boilers This valve has gunmetal construction with diaphragm protected working parts and has PTFE to metal seating. Its wide range of applications makes ...
The NABIC 25bar 3/4in BSP female pressure relief ...
Description:
The NABIC 25bar 3/4in BSP female pressure relief valve is designed for the protection of hot water boilers. This valve has gunmetal construction with diaphragm-protected working parts and has PTFE to metal seating. Its wide range of applications makes it ...
Compact solenoid valves suitable for most gas and ...
Description:
Compact solenoid valves suitable for most gas and fluid handling applications Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves ...