ABB, Jumper Bar

  • RS Stock No. 136-3886
  • Mfr. Part No. 1SNA173438R2400
  • Manufacturer ABB
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): FR
Product Details

Not assembled screw jumpers bar, - Allows connection between consecutive blocks, - Perforated jumper bar without captive screw and washer, - The perforated jumper bar must be fitted under the washer and the nut of each block.

2 stud terminals M5 x 19.5 mm 0.768 in,
Equipment: self locking nut + spring washer + washer,
18 mm 0.709 in spacing adding SCH6 or INH3,
Two jumpering options: 14 mm 0.551 in spacing with BJH14 and 18 mm 0.709 in spacing (adding INH3)
with BJH18,
NF F 61-017 designation: BE0018-FF5 (1SNA295012R1700 + SCH6 or INH3).

Specifications
Attribute Value
Accessory Type Jumper Bar
For Use With HD16/14.FF5.21 Stud Terminal Block, HD16/14.FF5.21.3 Stud Terminal Block
23 In stock for delivery within 2 working days
Unit of sale: Each
3.02
(exc. VAT)
3.71
(inc. VAT)
units
Per unit
1 - 4
€3.02
5 - 9
€2.87
10 - 24
€2.72
25 - 49
€2.58
50 +
€2.42
Related Products
Feed-through Screw terminal blocks for cables with cross ...
Description:
Feed-through Screw terminal blocks for cables with cross section 25 to 35 mm². The terminals are equipped with integral anti-slackening protection and guarantee reliable connection in all low voltage installations. • Low profile range of terminals that enables transition from ...
One key advantage of the W-Series is the ...
Description:
One key advantage of the W-Series is the choice of plug-in (ZQV) or screw-in (WQV) cross-connections within one modular terminal Saving substantial time in comparison to other screw terminals. Terminals available in a range of colours Screw-in and a plug-in ...
For standard & double deck terminals Permits transverse ...
Description:
For standard & double deck terminals Permits transverse connections of up to 10 terminals (easily cut to common fewer terminals). The bar and jumper bolts are pre-assembled. The alternate jumper bar permits the interconnection of consecutive or non-consecutive blocks. Where ...
Cross connectors are supplied preassembled into a 10 ...
Description:
Cross connectors are supplied preassembled into a 10 pole part They can be cut down from 10 poles to the required length Screws and collars can be removed to skip over terminals