Fluke 1664FC Electrical Tester, 50 V, 100 V, 250 V, 500 V, 1000 V , Earth Resistance Measurement With BLE, USB
- RS Stock No.:
- 176-9811
- Mfr. Part No.:
- 1664 UK-CLAMP
- Manufacturer:
- Fluke
Discontinued product
- RS Stock No.:
- 176-9811
- Mfr. Part No.:
- 1664 UK-CLAMP
- Manufacturer:
- Fluke
Legislation and Compliance
- COO (Country of Origin):
- CN
Product Details
The 1664 FC puts a lot of testing power in your hands to quickly and efficiently test to all local regulations, protect appliances, and share test results in real time over your smartphone.Protect appliances from accidental damageThe Fluke 1664 FC is the only tester with "Insulation PreTest" that stops the insulation test and provides a visual warning if it detects that an appliance is connected to the system under test. This helps you avoid potentially serious and costly mistakes that can cause damage to your customers’ peripheral equipment.
Includes "Insulation Pre-test" that detects when appliances are connected to the system and stops the test
Runs seven installation tests automatically in one sequence with a single connection through Auto Test
Allows you to share test results in real time over your smartphone via Fluke Connect Measurements
Runs seven installation tests automatically in one sequence with a single connection through Auto Test
Allows you to share test results in real time over your smartphone via Fluke Connect Measurements
Specifications
Attribute | Value |
|---|---|
| Automatic RCD Test | Yes |
| RCD Ramp Test | Yes |
| Model Number p | 1664FC |
| Insulation Test Voltage | 50 V, 100 V, 250 V, 500 V, 1000 V |
| Maximum Voltage Measurement | 500V ac/dc |
| Test Type | Continuity, Frequency, Insulation Resistance, Loop and Line Resistance, Measure Motor Windings, Phase Sequence Test, Prospective Earth Fault Current, Prospective Short Circuit Current, RCD Test, Resistance, Voltage, Wiring Polarity |
| Earth Resistance Measurement | Yes |
| Downloadable Data | Yes |
| Interface Type | BLE, USB |
| Continuity Test Current | 10mA |
| RCD Test Type | A/F, AC, B/B+, G, S |
| Remote Switch Mode | Yes |
| Test Standards | IEC 60364 |
| IP Rating | IP40 |
| Length | 100mm |
| Weight | 1.3 (With Battery)kg |
| Safety Category Level | CAT III, CAT IV |
| Width | 250mm |
| Dimensions | 100 x 250 x 125mm |
| Power Source | Battery |
| Plug Type | UK |
| Maximum Continuity Resistance | 2000Ω |
| Safety Category Voltage | 300 V, 500 V |
| Minimum Continuity Resistance | 20Ω |
| Maximum Operating Temperature | -40°C |
| Minimum Operating Temperature | -10°C |
| Safety Category | CAT III 500 V, CAT IV 300 V |
| Battery Type | AA |
| Height | 125mm |