Microchip MCP39F511N-E/MQ Energy Meter IC, 10 bit, 28-Pin QFN

  • RS Stock No. 165-4741
  • Mfr. Part No. MCP39F511N-E/MQ
  • Manufacturer Microchip
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): TH
Product Details

MCP39F511N Energy Measurement ICs

The MCP39F511N from Microchip is an integrated, dual-channel, single-phase power monitoring device that provides real-time measurement of input power and energy values for AC/DC power supplies. The capabilities of the MCP39F511N are ideal for applications such as dual-socket wall outlets, power strips, AC/DC power supplies, and power distribution.

On-board are three Analogue-to-Digital Converters (ADCs) for voltage and current load measurement, a 16-bit Calculation Engine, EEPROM and a flexible 2-Wire Interface. An integrated low-drift voltage reference combined with the 94.5 dB of SINAD performance on each measurement channel allows for better than 0.5% accurate designs across a 4000:1 dynamic range.

Features

Power monitoring of two loads
Power monitoring accuracy capable of 0.5% error across 4000:1 dynamic range
Built-in calculations using a 16-Bit processing core measuring:
- Active, reactive and apparent Power
- Active and reactive energy accumulation
- True RMS current, RMS voltage
- Line frequency, power factor
Dedicated Zero Crossing Detection (ZCD) pin
Dedicated PWM output pin
Automatic event pin control through fast voltage surge detection
Fast calibration routines
2-wire UART with 115.2k baud rate
512 bytes user-accessible EEPROM through page read/write commands
Non-volatile on-chip Memory
Low-Drift Internal Voltage Reference: 10 ppm/°C typical
Extended Temperature Range -40°C to +125°C

Energy/Power Measurement - Microchip

Specifications
Attribute Value
Resolution 10 bit
Mounting Type Surface Mount
Package Type QFN
Pin Count 28
Dimensions 5 x 5 x 0.8mm
Length 5mm
Width 5mm
Height 0.8mm
Maximum Operating Supply Voltage 3.6 V
Maximum Operating Temperature +125 °C
Minimum Operating Supply Voltage 2.7 V
Minimum Operating Temperature -40 °C
Temporarily out of stock - back order for despatch 11-08-2020, delivery within 2 working days
Unit of sale: Each (In a Tube of 73)
1.891
(exc. VAT)
2.326
(inc. VAT)
units
Per unit
Per Tube*
73 - 73
€1.891
€138.043
146 +
€1.716
€125.268
*price indicative
Related Products
Solid-state, compact one-piece unit10 bar LED display Single ...
Description:
Solid-state, compact one-piece unit10 bar LED display Single flashing LED signal for low battery energy reserve alert at 70% discharge Alternate flashing LED’s alert for battery empty status at 80% discharge Two reset methods: Open Circuit Reset (OCR) – upon ...
The MEMO4 is an energy meter dedicated to ...
Description:
The MEMO4 is an energy meter dedicated to measuring and rebilling energy consumption on a 230 V ac single phase network The meter allows you to check the main quantities at a glance on its backlit LCD screen due to ...
Using CMS-700 it is possible to measure and ...
Description:
Using CMS-700 it is possible to measure and calculate electrical parameters from both the mains and the branches, in order to provide the most comprehensive set of information on the systemA maximum of 3x32 sensors can be connected to the ...
RS485 (MODBUS), M-Bus communication, Ethernet or pulse outputs:To ...
Description:
RS485 (MODBUS), M-Bus communication, Ethernet or pulse outputs:To easily centralise your consumption, COUNTIS E1x devices have either one pulse output, one RS485 output (MODBUS), M-Bus or Ethernet Modbus TCP communication With RS485 communication models, you can configure your meters remotely.Multi-tariff:Lets ...