- RS Stock No.:
- 159-3957
- Manufacturer:
- RS PRO
Discontinued product
Alternatives
This product is not currently available. Here are our alternative recommendations.
- RS Stock No.:
- 159-3957
- Manufacturer:
- RS PRO
Technical data sheets
Legislation and Compliance
- COO (Country of Origin):
- GB
Product Details
RS PRO, 30 g Yellow Dual Cartridge Epoxy Adhesive for Various Materials
Providing durability in even the toughest conditions, RS PROs industrial-grade dual cartridge epoxy adhesive has a bond strength of up to 35 MPa. It's designed to robustly and powerfully bond surfaces in industrial applications.
Supplied as a two-part epoxy, the adhesives begin curing when the two components are mixed, staying useable for two hours at room temperature. The cured bond is clearer than that normally associated with epoxies and can be used on metals, wood and glass fibre, as well as many types of plastic. After combining equal parts of the resin and hardener the mixture is applied to one surface, before clamping two surfaces together and leaving the adhesive to cure. Using heat during curing will increase bond strength. Surfaces should be clean, dry and free from grease before the epoxy is applied.
RS PROs yellow dual cartridge epoxy adhesive is flame-retardant and useful in general applications where high strength is required.
Supplied as a two-part epoxy, the adhesives begin curing when the two components are mixed, staying useable for two hours at room temperature. The cured bond is clearer than that normally associated with epoxies and can be used on metals, wood and glass fibre, as well as many types of plastic. After combining equal parts of the resin and hardener the mixture is applied to one surface, before clamping two surfaces together and leaving the adhesive to cure. Using heat during curing will increase bond strength. Surfaces should be clean, dry and free from grease before the epoxy is applied.
RS PROs yellow dual cartridge epoxy adhesive is flame-retardant and useful in general applications where high strength is required.
Features and Benefits
30 g yellow dual cartridge epoxy adhesive
Bond strength of 35 MPa may be achieved with clean, abraded metal surfaces
Heat curing increases the binding strength
Roughen smooth surfaces before application
For use on metals, wood, glass fibre and many plastics
RoHS (Restriction of Hazardous Substances) compliant
Bond strength of 35 MPa may be achieved with clean, abraded metal surfaces
Heat curing increases the binding strength
Roughen smooth surfaces before application
For use on metals, wood, glass fibre and many plastics
RoHS (Restriction of Hazardous Substances) compliant
RS PRO
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards
theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
Specifications
Attribute | Value |
---|---|
Adhesive Type | Epoxy Adhesive |
Material Compatibility | Glass Fibre Reinforced Polymer, Metal, Plastic, Wood |
Colour | Yellow |
Package Type | Tube |
Package Size | 30 g |
Special Features | Heat Curing Increases Bond Strength |
Chemical Composition | 2-Piperazin-1-Ylethylamine, Nonylphenol |
Odour | Slight |
- RS Stock No.:
- 159-3957
- Manufacturer:
- RS PRO