MG Chemical 50 ml Dual Cartridge Epoxy Adhesive for Metal, Plastic

  • RS Stock No. 181-0359
  • Mfr. Part No. 9200-50ML
  • Manufacturer MG Chemical
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CA
Product Details

9200 is a toughened, two-part epoxy adhesive, designed to create long-lasting load-bearing joints. It adheres strongly to a wide range of materials that are difficult to bond to, including glass, ceramics, metals, engineered thermoplastics, and thermoset laminates, such as SMC (sheet molding compound) and GRP (glass-reinforced plastics). It creates tough vibration-resistant bonds, and is especially useful for joining dissimilar materials that will experience thermal cycling stresses. This product also provides excellent electrical insulation, and protects against static discharges, thermal shocks, galvanic corrosion, environmental humidity, salt water, fungus, and many harsh chemicals. It is smooth, non-sagging and thixotropic, so it is excellent for use on vertical surfaces and for gap filling. It is also useful for potting electronics in enclosures with gaps where a non-thixotropic encapsulant would flow through.

Specifications
Attribute Value
Material Compatibility Metal, Plastic
Package Type Dual Cartridge
Package Size 50 ml
Minimum Operating Temperature -40°C
Maximum Operating Temperature +150°C
Trade Name 9200
Cure Time 48 h
Flame Retardant Yes
Shear Strength 22 N/mm²
Physical Form Liquid
Specific Gravity 1.25
Operating Temperature Range -40 → +150 °C
Temporarily out of stock - back order for despatch when stock is available
Unit of sale: Each
25.26
(exc. VAT)
31.07
(inc. VAT)
units
Per unit
1 - 14
€25.26
15 - 39
€24.29
40 +
€23.22
Related Products
Acrylic based clear hot melt adhesive Exceptional adhesion ...
Description:
Acrylic based clear hot melt adhesive Exceptional adhesion to many difficult to bond materials Bonds to Metals, Concrete, Ceramics, Wood, Leather, Fabrics, Rubber and Melamine Bonds achieved on plastics such as PVC, Polycarbonate, ABS, Polyester, Polystyrene and Acrylics
Suitable for interior and exterior use Can be ...
Description:
Suitable for interior and exterior use Can be applied to metal, timber, tile, fibreglass, marble etcSuitable for pedestrian traffic400ml aerosol covers 2 square metres and dries in 30 minutes Not suitable for use on plastics as may cause discolouration.
Gorilla Glue is a one-component moisture hardening polyurethaneadhesive ...
Description:
Gorilla Glue is a one-component moisture hardening polyurethaneadhesive for weather- and boil-resistant bonds in accordance with theclassification requirements in EN 204/205-D4Gorilla Glue is generally intended for bonding wood plus wood-basedproducts, but can also be used to bond metal and plastic. ...
An industrial grade of epoxy adhesive designed for ...
Description:
An industrial grade of epoxy adhesive designed for general application where high strength is required For use with metals, wood, glass fibre and many plastics Mixed adhesive stays usable for 2 hours at room temperature Cured bond is clearer than ...