MG Chemical 25 ml Yellow Syringe Epoxy Adhesive for Various Materials

  • RS Stock No. 181-0360
  • Mfr. Part No. 9200FR-25ML
  • Manufacturer MG Chemical
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CA
Product Details

9200FR is a toughened, flame retardant, two-part epoxy adhesive, designed to create long-lasting load bearing joints. It adheres strongly to materials that are difficult to bond to, including glass, ceramics, metals, engineered thermoplastics, and thermoset laminates, such as SMC (sheet molding compound) and GRP (glass-reinforced plastics). It creates tough vibration-resistant bonds, and is especially useful for joining dissimilar materials that will experience thermal cycling stresses. This product also provides excellent electrical insulation, and protects against static discharges, thermal shocks, galvanic corrosion, environmental humidity, salt water, fungus, and many harsh chemicals. It is smooth, non-sagging and thixotropic, so it is excellent for use on vertical surfaces and for gap-filling. It is also useful for potting electronics in enclosures with gaps where a non-thixotropic encapsulant would flow through.

Attribute Value
Material Compatibility Ceramic, Glass, Metal, Plastic
Colour Yellow
Package Type Syringe
Package Size 25 ml
Minimum Operating Temperature -40°C
Maximum Operating Temperature +150°C
Trade Name 9200FR
Cure Time 24 h
Flame Retardant Yes
Shear Strength 14 N/mm²
Viscosity Measurement 370000 (Part B) cP/s, 380000 (Part A) cP/s
Operating Temperature Range -40 → +150 °C
Viscosity Description Low
Specific Gravity 1.3
Physical Form Liquid
Temporarily out of stock - back order for despatch when stock is available
Unit of sale: Each
(exc. VAT)
(inc. VAT)
Per unit
1 - 14
15 - 39
40 +
Related Products
The Double bubble 150g epoxy adhesive is a ...
The Double bubble 150g epoxy adhesive is a two-part, clear glue ideally suited to maintain applications that require fast setting It is suitable for bonding substrates including metals, wood, ceramics, glass, stone, and concrete. Full secure bond achieved within 30min ...
TPM550 features high thermal conductivity of 55 W/m.K ...
TPM550 features high thermal conductivity of 55 W/m.K and becomes workable at approximately 45°C. The material’s advanced formulation ensures minimal contact thermal resistance. Like TPM350, TPM550 also produces no mess due to its thixotropic characteristics which prevent flow outside of ...
An industrial grade of epoxy adhesive designed for ...
An industrial grade of epoxy adhesive designed for general application where high strength is required For use with metals, wood, glass fibre and many plastics Mixed adhesive stays usable for 2 hours at room temperature Cured bond is clearer than ...
The ITW Devcon 50ml epoxy resin is a ...
The ITW Devcon 50ml epoxy resin is a 2-part structural resin and dispensing systems which allow the metering, mixing and accurate application of epoxy and acrylic structural adhesives They ensure accurate ratio mix, fast application with a predetermined flow rate ...