Sensata/Cynergy 3 RSF40 Series Horizontal Polyphenylene Sulfide Float Switch, Float, 1m Cable, NO/NC, 240V ac Max, 120V
- RS Stock No.:
- 338-9716
- Mfr. Part No.:
- RSF46Y100RG
- Manufacturer:
- Sensata / Cynergy3
6 Within 1 working day(s) (IE stock)
459 Within 2 working day(s) (EU stock)
Added
Price Each
€34.12
(exc. VAT)
€41.97
(inc. VAT)
Units | Per unit |
1 - 4 | €34.12 |
5 - 9 | €33.07 |
10 + | €32.00 |
- RS Stock No.:
- 338-9716
- Mfr. Part No.:
- RSF46Y100RG
- Manufacturer:
- Sensata / Cynergy3
Legislation and Compliance
- COO (Country of Origin):
- GB
Product Details
Cynergy3 Horizontal Float Switches
Cynergy3 offers wide range of horizontal switches which are WRAS approved and have low-cost compact design. These horizontal float switches consist of a reed switch and a pivoted actuator magnet and can be used for N/O or N/C operation. The switch action can be reversed by mounting the float switch with the float able to move upwards away from the body instead of downwards.
WRAS approval explained
WRAS is the standard against waste, misuse, undue consumption or contamination of the water supply and must have an appropriate quality and standard.
What materials can you choose from?
Nylon
Polypropylene
Polypropylene Sulfide (PPS)
Polypropylene
Polypropylene Sulfide (PPS)
Features and Benefits
Operating temperature: -10 °C to +120 °C
N/O or N/C Switch output
Switch action may be reversed by rotating the switch through 180º
Choice of gasket materials: Silicone, Nitrile, Viton or combination of Silicone & Nitrile
Flying Lead
M12 plug connection
Internal & external fitting inside a tank
UL recognised
N/O or N/C Switch output
Switch action may be reversed by rotating the switch through 180º
Choice of gasket materials: Silicone, Nitrile, Viton or combination of Silicone & Nitrile
Flying Lead
M12 plug connection
Internal & external fitting inside a tank
UL recognised
Typical Applications
These Cynergy3 Horizontal Switches are most likely to be used in vending machines, commercial washing machines and evaporator units.
Note
Suitable for signal switching and for use with transistorised input/low power, suppressed coil miniature relays. Not suited for any inductive or inrush (e.g. filament lamps) loads.
Sensata Cynergy3 Horizontal Internal Float Switch, NO/NC, 1 m - RSF40 Series - RSF46Y100RG
Use this Sensata Cynergy3 float switch to monitor liquid levels inside a tank or fluid reservoir. A change in fluid level causes the float to move up or down, so the internal reed switch will open or close at a specific level. This straightforward design gives long-term service without the need for calibration. A polyphenylene sulfide body, along with a silicone and Viton gasket mean this unit is suitable for use with aggressive chemical substances such as acids, alkalis, oils, greases and alcohols. It's fitted from the inside of the tank and has an M16 thread.
Features and Benefits
• Simple 180° rotation to set the switch to the normally open (NO) or normally closed (NC) position for ease of use
• Thermoplastic rubber cable with a high mechanical load rating for durability in harsh environments
• M12 plug connection for ease of installation
• Thermoplastic rubber cable with a high mechanical load rating for durability in harsh environments
• M12 plug connection for ease of installation
Is this float switch suitable for high-temperature applications?
Thanks to the switch's broad operating temperature range of -10°C to +120°C, it's suitable for use with both cold and hot liquids.
Specifications
Attribute | Value |
---|---|
Device Type | Float |
Mounting Type | Horizontal |
Switch Output | NO/NC |
Body Material | Polyphenylene Sulfide |
Cable Length | 1m |
Minimum Operating Temperature | -10°C |
Maximum Operating Temperature | +120°C |
Maximum AC Voltage | 240V |
Maximum DC Voltage | 120V |
Maximum Current | 600 mA |
Gasket Material | Silicone, Viton |
Series | RSF40 |
Standards Met | WRAS |