RS PRO Radial Flow Turbine Flow Meter, 1.5 L/min → 30 L/min,

  • RS Stock No. 257-133
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Liquid Flow Sensors

Two flow transducers manufactured in acetal copolymer with brass compression fittings at both ends to fit 15mm diameter pipe connections.

Provides a pulsed output proportional to flow rate
LED and photodetector are separated by a turbine mounted on sapphire bearings
LED requires an external current limiting resistor (dependent on supply voltage)
Suitable for use with mains and heating system waters etc.
Rise/fall times 60/6ns
Output voltage 200mV (low); VCC (high)
Diode: Forward current 10mA, Power dissipation 100mW

Note

Not suitable for use with strong mineral acids/solutions, strong or searching solvents.

//media.rs-online.com/t_line/LI257133-01.gif
//media.rs-online.com/t_line/LI341480-10.gif
Specifications
Attribute Value
Media Monitored Liquid
Device Type Radial Flow Turbine
Minimum Flow Rate 1.5 L/min
Maximum Flow Rate 30 L/min
Supply Voltage 4.5 → 16 V dc
Pipe Diameter Range 15 mm
Maximum Pressure 20bar
Material Acetal Copolymer
Minimum Operating Temperature -40°C
Maximum Operating Temperature +70°C
Current Rating 10 mA
42 In stock for delivery within 2 working days
Unit of sale: Each
42.79
(exc. VAT)
52.63
(inc. VAT)
units
Per unit
1 +
€42.79
Related Products
The EASIFLOW is a flow measuring device incorporating ...
Description:
The EASIFLOW is a flow measuring device incorporating an AC-DC switch suitable for controlling valves or pump motors or for activating alarm signals • Oil and water calibrated • Pressures up to 10 bar • Flows from 1 L/min to ...
The Atrato Process ultrasonic flowmeter has been designed ...
Description:
The Atrato Process ultrasonic flowmeter has been designed to operate in challenging process and control environments The body is manufactured from durable 316 stainless steel and the electrical components are sealed to IP65 rating. Four flow ranges are available from ...
This lightweight, compact flow sensor is intended as ...
Description:
This lightweight, compact flow sensor is intended as a low cost option for flow rates of 1 to 20 l/min with low pressure drop Basic construction consists of a one piece sensor body housing a turbine rotor. Flow through the ...
Calibrated flow indicator with switched output specifically designed ...
Description:
Calibrated flow indicator with switched output specifically designed for use with water Suitable for installation in any plane. Utilises the technique of differential pressure across a piston against a calibrated spring, with the flow rate read off a scale marked ...