Huco Friction Clutch, 6mm Bore 132Ncm
- RS Stock No.:
- 890-3023
- Mfr. Part No.:
- 269P25.2222.RS
- Manufacturer:
- Huco
Temporarily out of stock - back order for despatch 25-04-2024, delivery within 2 working days
Added
Price Each
€72.85
(exc. VAT)
€89.61
(inc. VAT)
| Units | Per unit |
| 1 - 4 | €72.85 |
| 5 - 9 | €69.94 |
| 10 + | €68.47 |
Alternative
This product is not currently available. Here is our alternative recommendation.
- RS Stock No.:
- 890-3023
- Mfr. Part No.:
- 269P25.2222.RS
- Manufacturer:
- Huco
Legislation and Compliance
- COO (Country of Origin):
- GB
Product Details
6 Plate Adjustable Friction Clutches with Clamp Oldham Coupler, Set Screw & Clamp Fixings
Friction clutches from Huco Vari-Tork designed with adjustable drag or slip torque. Controlled slip takes place between the hub and housing whenever the load exceeds the set torque.
A simple construction, the pressure is brought on to the plates and friction rings by an adjuster acting through a spring and pressure plate. The load can either be connected to the steel inner hub or the aluminium alloy housing.
A simple construction, the pressure is brought on to the plates and friction rings by an adjuster acting through a spring and pressure plate. The load can either be connected to the steel inner hub or the aluminium alloy housing.
Features and Benefits
• Compact proportions
• 4 interface styles
• Set screw or clamp connection
• Can be used as a torque limiter, tensioning, overrun device
• 4 interface styles
• Set screw or clamp connection
• Can be used as a torque limiter, tensioning, overrun device
Product Application Information
As a torque limiter, Vari-Tork interrupts continuity between the power source and load when it reaches a pre-determined level.
As a tensioning device, Vari-Tork typically maintains tension in a filament or tape winding operation by exerting drag on the feed spool.
As an overrun device, Vari-Tork absorbs residual inertia of a motor when the load is braked or reaches a terminal stop.
As a tensioning device, Vari-Tork typically maintains tension in a filament or tape winding operation by exerting drag on the feed spool.
As an overrun device, Vari-Tork absorbs residual inertia of a motor when the load is braked or reaches a terminal stop.
Specifications
Attribute | Value |
|---|---|
| Bore | 6mm |
| Torque Rating | 132Ncm |
| Body Diameter | 25.8mm |