Pegler Yorkshire Bronze Globe Valve 110007, 1/2 in BSPT 32 bar

Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
Product Details

Bronze Globe Valves PN32 Series B

A range of bronze globe valves, individually hydrostatically tested to BS 5154 at the following test pressures: Shell: 48 bar, Seat: 35.2 bar
Rising Stem
Threaded bonnet
Renewable disc which is suitable for steam service
Bronze trim with glass filled PTFE disk
BS21 Taper thread (ISO 7)

Specifications
Attribute Value
Connection 1/2 in BSPT
Maximum Working Pressure 32 bar
Body Material Bronze
Thread Size 1/2in
Thread Standard BSPT
46 In stock for delivery within 2 working days
Unit of sale: Each
31.15
(exc. VAT)
38.31
(inc. VAT)
units
Per unit
1 - 4
€31.15
5 +
€30.18
Related Products
316L stainless steel construction, fully machined from quality ...
Description:
316L stainless steel construction, fully machined from quality forgingsEPDM seals Creep resistant bearings Reinforced nylon handle Reduced risk of contamination by top and bottom seals Operating temperature -10ºC to +120°CWorking pressure 09 bar to 10 bar Polished disc.
The LCV1 series bronze lift check valve by ...
Description:
The LCV1 series bronze lift check valve by Spirax Sarco is designed to prevent reverse flow Prevents reverse flow Reduces water-hammer damage from hydraulic pressure surges Installed in horizontal lines.
A combined sight glass and check valve used ...
Description:
A combined sight glass and check valve used to visually check the condition and leakage of steam traps It can be installed horizontally or vertically (bottom to top), downstream of the steam trap. it is constructed with a bronze body, ...
These Float Valves are suitable for pressures up ...
Description:
These Float Valves are suitable for pressures up to 14 bar (206 psi) WRC approved Rubber diaphragm Discharge above overflow level prevents back siphonage - meets requirements of Byelaw 42No hiss or prolonged shut-off noise Thumbscrew on lever provides vertical ...