- RS Stock No.:
- 198-7396
- Mfr. Part No.:
- GWN2/SS
- Manufacturer:
- Craig & Derricott
Temporarily out of stock - back order for despatch 29-05-2024, delivery within 2 working days
Added
Price Each
€664.37
(exc. VAT)
€817.18
(inc. VAT)
Units | Per unit |
1 + | €664.37 |
Alternative
This product is not currently available. Here is our alternative recommendation.
- RS Stock No.:
- 198-7396
- Mfr. Part No.:
- GWN2/SS
- Manufacturer:
- Craig & Derricott
Technical data sheets
Legislation and Compliance
- COO (Country of Origin):
- GB
Product Details
GWN Series, Grab Wire
Designed to offer grabwire switch protection for personnel working in close proximity to conveyors or rotating and moving machines in various environments
Typical applications: - conveyors, assembly lines, transfer lines, packaging machinery, process equipment
Grabwire switches are a convenient way of installing two-rope pull switches on a long rope run, with common wiring and two heads
When the units are correctly installed and set, the system switching contacts are closed allowing the system to operate
If the grabwire is pulled the switch contacts will open, providing operator safety. Whether the grabwire has been pulled, gone slack or been broken, it can only be started by manually resetting the switch unit
100M max span, each side
Ingress protection to IP65 as standard
Sealed M20 cable entries
Safety and auxiliary contacts as standard 2N/C + 1N/O
To comply with BS 5304 switch units should be fitted at each end of the grabwire
To complete an installation a connection kit is required, containing the wire rope, instruction leaflet and all other necessary elements
Please order the appropriate kit for length for your installation from the RS Rope kits for grabwire switches
Standards & Approvals BS EN 60947-5-1, BS EN 60947-5-5, BS 5304
Typical applications: - conveyors, assembly lines, transfer lines, packaging machinery, process equipment
Grabwire switches are a convenient way of installing two-rope pull switches on a long rope run, with common wiring and two heads
When the units are correctly installed and set, the system switching contacts are closed allowing the system to operate
If the grabwire is pulled the switch contacts will open, providing operator safety. Whether the grabwire has been pulled, gone slack or been broken, it can only be started by manually resetting the switch unit
100M max span, each side
Ingress protection to IP65 as standard
Sealed M20 cable entries
Safety and auxiliary contacts as standard 2N/C + 1N/O
To comply with BS 5304 switch units should be fitted at each end of the grabwire
To complete an installation a connection kit is required, containing the wire rope, instruction leaflet and all other necessary elements
Please order the appropriate kit for length for your installation from the RS Rope kits for grabwire switches
Standards & Approvals BS EN 60947-5-1, BS EN 60947-5-5, BS 5304
Note
Our rope switch kits contain all fittings necessary for installation. Available in 5, 10, 20, 30, 50 and 75 metre lengths.
Stock No typ 239-6757
Stock No typ 239-6757
Specifications
Attribute | Value |
---|---|
Normal State Configuration | 2NO/2NC |
Cable Length | 100m |
Mounting Orientation | Straight |
IP Rating | IP65 |
Number of Poles | 4P |
Series | GWN |
Length | 209mm |
Width | 94mm |
Depth | 107.5mm |
Housing Material | Stainless Steel |
Maximum AC Voltage | 415V |
Dimensions | 209 x 94 x 107.5mm |
Conduit Entry | M20 |
Maximum Current | 6A |
Maximum DC Voltage | 24V |
- RS Stock No.:
- 198-7396
- Mfr. Part No.:
- GWN2/SS
- Manufacturer:
- Craig & Derricott