Bridgetek CleO50A, CleO 5in Resistive Touch Screen Arduino Shield With 2 x MikroBus Slots

  • RS Stock No. 126-1742
  • Mfr. Part No. CleO50A
  • Manufacturer Bridgetek
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

CleO 5.0in Touchscreen LCD for Arduino

The CleO50 graphics display panel allows easy development of Human-Machine Interfaces (HMI) based on an Arduino-format platform. Designed to work with an Arduino UNO R3 or compatible host processor board such as the NerO available from FTDI Chip.

5.0in 800 x 480pixel TFT LCD panel with resistive touchscreen
Landscape and portrait modes supported
Anti-Aliased graphics throughout for much finer image quality
Smooth animations at up to 60fps
Direct file transfers between microSD/eFlash and Graphics subsystem without using Host processor resources
FT812 Embedded Video Engine (EVE) graphic controller
FT900 32-bit microcontroller
MicroSD card socket
8MB eFlash memory
Real-Time Clock with battery back-up
USB DFU port for firmware updates
Camera interface via 24-pin 0.5mm pitch FFC/FPC, bottom-contact connector
Support for OmniVision OV2640 camera module or CleO-CAM1A camera
PWM audio supported with speaker amplifier
I²S and CAN bus interfaces
Headers for 2 x MikroBUS modules
CR1220 coin cell holder for battery back-up
Ready to use in a panel mountable bezel
Operating temperature range: -20 to +70°C

Compatible Accessories
110-9118 NerO-LP1 Energy-efficient Arduino-format processor board
124-1039 CleO-CAM1 5Mpixel camera
124-1040 CleO-RIO1 Reverse-I/O pins Adapter Shield
124-1041 CleO-SPK1 0.5W Speaker
124-1042 MS-C6-8G MicroSD Flash card, 8GB, Class 6

Approvals

CE FCC

Specifications
Attribute Value
Diagonal Display Size 5in
Display Technology Resistive Touch Screen
Kit Classification Arduino Shield
Featured Device 2 x MikroBus Slots
Kit Name CleO
8 In stock for delivery within 2 working days
Unit of sale: Each
131.52
(exc. VAT)
161.77
(inc. VAT)
units
Per unit
1 +
€131.52
Related Products
The starter kit SK-gen4-32PT-PI from 4 D Systems ...
Description:
The starter kit SK-gen4-32PT-PI from 4 D Systems is intended for the Raspberry Pi (see 896-8660) The Kit offers a Picaso integrated 3.2 in display module with hardware included. The Gen4 uLCD module has a resistive touch display and it ...
The starter kit SK-gen4-28DT-PI from 4 D Systems ...
Description:
The starter kit SK-gen4-28DT-PI from 4 D Systems is intended for the Raspberry Pi (see 896-8660) The Kit offers an integrated 2.8” display module with accessories. The Gen4-28DT-PI uLCD module has a resistive touch display and it helps you explore ...
The SK-gen4-35DT-PI Starter Kit by 4 D Systems ...
Description:
The SK-gen4-35DT-PI Starter Kit by 4 D Systems is designed for Raspberry Pi (RS 896-8660) The Kit has a 3.5 in display module with an integrated Diablo16 smart controller it also comes with some of the hardware included. The Gen4 ...
The starter kit SK-gen4-43DT-PI from 4 D Systems ...
Description:
The starter kit SK-gen4-43DT-PI from 4 D Systems is intended for use with the Raspberry Pi (see 896-8660) The Kit offers an integrated Diablo16 graphics controller 4.3 in display module with some accessories included. The Gen4 uLCD module has a ...