Sick Analogue Inclination Sensor switching current 35 mA @ 24 V supply voltage 16 → 35 V dc

  • RS Stock No. 136-9179
  • Mfr. Part No. TMM88B-AKC090
  • Manufacturer Sick
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

TMM88 Series Dual-Axis Non-Contact Inclination Sensors

Sick TMM88 series inclination sensors use capacitive MEMS technology to take a non-contact measurement of the inclination angle of an object in relation to the earth’s gravity. TMM88 two-dimensional sensors take measurements with an accuracy of up to +/- 0.02°. With the rugged and UV-resistant plastic housing, the TMM88 inclination sensors are also ideally suited to outdoor use.

Features and Benefits

Two-dimensional inclination sensor ±90° measuring range
Fully encapsulated electronics
High-precision

Sick Inclination Sensors

Specifications
Attribute Value
Output Type Analogue
Body Style Block
Mounting Style Threaded Mount
Supply Voltage 16 → 35 V dc
Terminal Type 5-Pin M12 Male Connector
Maximum DC Voltage 35V
Detection Range ±90 °
Switching Current 35 mA @ 24 V
Switching Frequency 80 Hz
Length 90mm
Width 58mm
Depth 30mm
Dimensions 90 x 58 x 30 mm
Maximum Operating Temperature +80°C
Response Time 265 ms
Reverse Polarity Protection Yes
Short Circuit Overload Protection Yes
Standards Met EN 60068-2-27, EN 60068-2-6, EN 61326-1, EN ISO 13309, EN ISO 14982, IEC 60529
IP Rating IP65, IP67
Minimum Operating Temperature -40°C
Housing Material Aluminium
Temporarily out of stock - back order for despatch 18-11-2020, delivery within 2 working days
Unit of sale: Each
267.31
(exc. VAT)
323.45
(inc. VAT)
units
Per unit
1 +
€267.31
Related Products
ABS housing Open collector PNP + NPN Output ...
Description:
ABS housing Open collector PNP + NPN Output Normally open contact with bounce free operationLED indication of alignment and diagnosis Specified magnet assembly must be used with this sensor Sealed to IP65Cable length 145mm Dimensions 32 x 24 x 10 ...
Ceramic based, linear Hall-effect ratiometric devices which produce ...
Description:
Ceramic based, linear Hall-effect ratiometric devices which produce an output voltage proportional to the intensity of the magnetic field to which they are exposed Three-pin in-line PCB terminals, 0.1in spacing Laser trimmed thin and thick film resistors-40 to 125°C operating ...
Hall effect sensors with output proportional to supply ...
Description:
Hall effect sensors with output proportional to supply voltage and the strength of the magnet field Single current sinking or current sourcing linear output Rail-to-rail operation provides more useable signal for higher accuracy Responds to either positive or negative gauss ...
2 output styles; 5V logic (pull-down) or PNP+ ...
Description:
2 output styles; 5V logic (pull-down) or PNP+ NPN (N/O)LED indication of alignment and diagnosis Matching magnet assembly must be used M12 thread Cable length 300mm