Bare Conductive Touch Board Capacitive Touch Shield for Arduino

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Bare Conductive Touch Board

The Bare conductive touch is a microcontroller board with a dedicated capacitive touch and MP3 decoder ICs. It has a headphone socket and micro SD card holder (for file storage), as well as, 12 capacitive touch electrodes. This device is based around the ATmega32U4 and runs at 16MHz from 5V. It has a micro USB connector, a JST connector for an external lithium polymer (LiPo) cell, a power switch, and a reset button. This device resembles the Arduino Leonardo board and can be programmed using the Arduino IDE. The ATmega32U4 can appear to a connected computer as a mouse or a keyboard, (HID) serial port (CDC), or USB MIDI device.NoteElectric Paint: 50ml jar RS Part No. 835-2693 and 10ml tube RS Part No. 835-2699

Features and Benefits

12 x analogue input channels 12 x touch electrodes of which 8 can be configured as extra GPIO with PWM capability 20 x GPIO pins maximum 3.5 mm audio out jack socket 7 x PWM channels Arduino compatible (recognised as an Arduino Leonardo in IDE) Arduino Rev 3 shield compatible (check pins available) ATMega32u4 16 MHz microcontroller, 32 KB flash memory, 2.5 KB SRAM, 1 KB EEPROM Bootloader uses 4 KB of flash memory Built in LiPo battery charger with status LED Easy-to-use platform External power socket MicroSD card slot MicroUSB socket Power slide switch Reset pushbutton VS1053B multi-format audio CODEC

Applications

By combining the touch board and bare conductive paint and we can turn almost any material or surface into a capacitive or proximity sensor Painting a light switch on your wall or making a paper piano or triggering a sound via the onboard MP3 player Touch-activated projects enabled by combining touch board with electric paint

Certifications

ANSI/ESD S20.20:2014 BS EN 61340-5-1:2007

Specifications
Attribute Value
User Interface Capacitive Touch
For Use With Arduino
Kit Classification Shield
Kit Name Touch Board
10 In stock for delivery within 2 working days
Unit of sale: Each
93.69
(exc. VAT)
115.24
(inc. VAT)
units
Per unit
1 +
€93.69
Related Products
The starter kit SK-gen4-28DT-PI from 4 D Systems ...
Description:
The starter kit SK-gen4-28DT-PI from 4 D Systems is intended for the Raspberry Pi (see 896-8660) The Kit offers an integrated 2.8” display module with accessories. The Gen4-28DT-PI uLCD module has a resistive touch display and it helps you explore ...
The starter kit SK-gen4-43DT-PI from 4 D Systems ...
Description:
The starter kit SK-gen4-43DT-PI from 4 D Systems is intended for use with the Raspberry Pi (see 896-8660) The Kit offers an integrated Diablo16 graphics controller 4.3 in display module with some accessories included. The Gen4 uLCD module has a ...
The CleO graphics display panel allows easy development ...
Description:
The CleO graphics display panel allows easy development of Human-Machine Interfaces (HMI) based on an Arduino-format platform Designed to work with an Arduino UNO R3 or compatible host processor board such as the NerO available from FTDI Chip. 3.5in 320 ...
The CleO50 graphics display panel allows easy development ...
Description:
The CleO50 graphics display panel allows easy development of Human-Machine Interfaces (HMI) based on an Arduino-format platform Designed to work with an Arduino UNO R3 or compatible host processor board such as the NerO available from FTDI Chip. 5.0in 800 ...