Matrix E-block Demonstration Board

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

EBM007 Rotary Encoder Sensor Module

The EBM007 is a rotary encoder sensor module that can create a digital pot when connected to two digital inputs of a microcontroller. This means that rotational and directional information can be obtained from the digital outputs.

Benefits of the EBM007 Rotary Encoder Sensor Module
•Flowcode free 30 day trial
•0.1 inch pitch connector enables the module to be connected to other boards aside the EB090 Sensor Mother Board

Note

This sensor is also included within the EBM1000 E-block Sensors Bundle (889-2999). The kit includes the entire range of e-blocks sensor modules with the EB090 Sensor Mother Board.

E-blocks EBMxxx Sensor Modules

A range of Matrix E-blocks sensor modules which are intended for use with the EB090 E-block Sensor Mother Board (889-2905). Any two individual sensor modules can be plugged into an EB090 E-block board allowing upstream access to various analogue and digital sensors.

Matrix Techonlogy E-Blocks

E-blocks from Matrix Technology are small circuit boards with a block of electronics that are typically found in an electronic or embedded system. They be quickly snapped together to form a fully functioning systems and this ease of use makes them ideal for rapid prototyping.

Currently there are more than 50 E-Block boards available. From simple LED boards to sensors, Bluetooth, Motor Control, RFID, LCD Display, WiFi, GPS and many more. Whether you are PIC or Arduino programming or working with other hardware platforms there is sure to be something to suit your needs.

E-blocks are supported with software (including PIC, dsPIC, ARM and AVR Arduino IDE, Flowcode) and courseware.

Specifications
Attribute Value
Kit Classification Demonstration Board
Kit Name E-block
2 In stock for delivery within 2 working days
Unit of sale: Each
7.37
(exc. VAT)
9.07
(inc. VAT)
units
Per unit
1 +
€7.37
Related Products
Copper tracks and pads on a 0.1 in ...
Description:
Copper tracks and pads on a 0.1 in (2.54mm) pitch d.i.l. packages. Board holes 1.0mm (0.040 in). The component side has additional copper tracks for supply rails, etc. Drilling position marked for easy fitting of racking Card Handles or Card ...
Prototyping boards manufactured from epoxy glass material to ...
Description:
Prototyping boards manufactured from epoxy glass material to BS 4584 part 3 or 16. Card thickness is 1.6 mm. Copper is 305 g/m² (1 oz/ft²). Edge connector fingers are gold plated to a thickness of 1.5 microns. 1.0 mm (0.040 ...
Easy access to the AD7879/AD7879-1, a 12-Bit SAR ...
Description:
Easy access to the AD7879/AD7879-1, a 12-Bit SAR Analogue-to-Digital Converter (ADC) with a synchronous serial interface and low on-resistance switches for driving 4-wire resistive touch screens. Connects to any PC USB port. Self-contained evaluation system. Test points for easy access ...
The Gesture click board from Mikro. Elektronika is ...
Description:
The Gesture click board from Mikro. Elektronika is an add-on board — great for user interfaces. With the on-board MGC3130 3D gesture recognition controller, you can command an MCU or PC by either physically touching the Gesture click or by ...