Parker Steel Zinc Plated Hydraulic Elbow Threaded Adapter, 8E6MK4S, G 1/2 Female G 1/2 Female

  • RS Stock No. 797-2044
  • Mfr. Part No. 8E6MK4S
  • Manufacturer Parker
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
Product Details

Swivel Elbow

Female to female parallel thread swivelling elbow.
Parkers K series adapters are manufactured to meet BS5200 standards and designed to seal with BSP
Hose swivel connectors. Parkers K4 adapter series can be used with Parker D9/92, B1, B2 and B4 adapters. Straight fittings can also be used an adaptor with ISO 1179-1 / DIN 3852 ports by using a bonded seal.

Note

K4 adapters are not interchangeable with JIS P4 fittings.

Elbow & Tee Adaptors

BSP parallel threaded adaptors. Manufactured from steel to BS5200 with a zinc yellow chromated finish to give a high corrosion resistance (500 hours in salt spray test). All adaptors have a working temperature range -40 to +120°C.,The 60° female cone makes these adaptors an ideal port fitting for use with our range of BSP reusable fittings and crimped hose assemblies.

Warning

  • Hydraulic systems can work at high pressures, and fittings and adaptors can be subjected to extreme loadings such as vibration and uncontrolled pressure peaks. When choosing fittings or adaptors careful attention should be given to the technical specifications.
Specifications
Attribute Value
Connector A G 1/2 Female
Connector B G 1/2 Female
Material Steel
Finish Zinc Plated
Connector A - Gender Female
Connector A - Thread Standard G
Connector B - Gender Female
Connector B - Thread Standard G
Maximum Operating Pressure 199 bar
11 In stock for delivery within 2 working days
Unit of sale: Each
13.73
(exc. VAT)
16.89
(inc. VAT)
units
Per unit
1 - 4
€13.73
5 - 9
€13.17
10 - 24
€12.88
25 +
€12.61
Related Products
The KQ2 one-touch bulkhead adaptors are used to ...
Description:
The KQ2 one-touch bulkhead adaptors are used to connect male thread and tube through a panel and are suitable for use with nylon and polyurethane tubes The special profile design of these fittings provides positive sealing under pressure without reducing ...
Enots compression fittings are ideal for most general ...
Description:
Enots compression fittings are ideal for most general industrial applications Manufactured entirely from extruded brass bar or hot brass stampings, they can be used under extreme conditions of pressure and temperature, limited for all practical purposes only by the tubing ...
• Suitable for low pressure applications• Allows compressed ...
Description:
• Suitable for low pressure applications• Allows compressed air from one side to flow and blocks the inverse flow to protect and maintain the vacuum line• Easily applied to low pressure piping• Applicable fluid type, air (no other type of ...
Series 115 is available in both standard and ...
Description:
Series 115 is available in both standard and flat-face design, for ease of cleanliness The series is a CEJN original with extremely small outside dimensions and patented seal design. High pressure couplings working up to 1000 bar / flat faced ...