RS Components
Our website uses cookies and similar technologies to provide you with a better service while searching or placing an order, for analytical purposes and to personalise our advertising to you.

Watson Smith 0.85L/min NPT 1/4 Female IP Converter, NPT, 1/4 in, 0.2 → 1bar

2 Within 1 working day(s) (IE stock)
23 Within 2 working day(s) (EU stock)
Add to Basket

Unit of sale Each


(exc. VAT)


(inc. VAT)



RS Stock No.:
Mfr. Part No.:
Watson Smith

RoHS Status: Not Applicable

COO (Country of Origin):
unitsPer unit
1 +€595.55

Standard Converters

These standard converters are reliable pneumatic fittings. This range has a 1/4 inch female port and includes mounting bracket and connector plug. There is minimal vibration from this converter and it also has the benefit of being sensitive to low pressures. Proportional converters have a glass reinforced nylon cover and nitrile diaphragms. This range of pneumatic pressure control proportional converters provide excellent pressure control providing oil free, dry air filtered to 5μm.

Integral volume booster gives flow rates up to 4·72 dm3/s, 10scfm
Response time typically 2 seconds (10-90%)
Low supply pressure sensitivity
1/4 inch female port connection
Supplied with DIN43650 connector plug


*Inlet pressure must be at least 0.7 bar above output pressure

I/P & E/P Converters

I/P converters are electro-pneumatic instruments that will change pneumatic pressures in response to varying electrical current and voltage input signals. They have extensive application potential in both industrial and process systems, for control of cylinders, valves, valve positioners, relays, brakes and clutches. The converters can be mounted in control rooms or in the field, and have zero and span settings that are adjustable from the front face of the instrument. Failsafe converters are available which will cause the output pressure to fall to <15mbar (0.2 psig) in the event of power failure or loss of input signal.

Manufacturer Series100X, 101X
Flow Rate0.85L/min
Input Signal4-20mA
Connection SizeNPT 1/4 Female
Connection Thread StandardNPT
Maximum Operating Pressure15 psi
Maximum Operating Temperature+85°C
Connection Thread Size1/4 in
Minimum Operating Pressure3psi
Minimum Operating Temperature-40°C