Schaffner 2A, 250 V ac Male Panel Mount IEC Inlet Filter FN284B-2-06, Faston 2 Fuse

Convenient, highly-integrated module
Fuse drawer with easy-access
Dual-pole rocker switch
Panel cut out 60.8 x 29.3mm FC 40 x 3 mm

Neutral line must not be fused where it is referenced to earth.

UL recognised component, CSA certified, VDE, SEMKO

The Schaffner IEC inlet filter is a male type, dual fuse, panel mount device with C14 IEC connector power entry module. It has a supply voltage rating of 250VAC with a high-performance current rating of 2A. It is a medical version with a bleed resistor and without Y2 capacitor. The operating frequency of this filter ranging between 50Hz and 400Hz.
Warning:
Neutral line must not be fused where it is referenced to the earth.

Convenient, highly-integrated module
Fuse drawer with easy access
Dual-pole rocker switch
Fast-on terminals
Maximum leakage current is 190μA
Operating temperature ranging between -25°C and 85°C

Portable electrical and electronic equipment
Consumer goods
EDP and office equipment
Single-phase power supplies and switch-mode power supplies
Test and measurement equipment
Medical equipment

UL approved
CSA certified
VDE
SEMKO
IP40 rated

UL Listed; CSA Certified; VDE; SEMKO

Schaffner Medical FN92XXB and FN28XB Series

IEC Inlet plugs with integral mains filter. Designed to filter mains borne interference where capacitors alone may prove inadequate. Connection by 250 ( 1/4 in) receptacles. (For insulating boots see typically stock no. 526-0724).,Low earth leakage current. IEC 950 Compliant.