Megger MIT400 2, Insulation Tester 200GΩ CAT IV 600 V UKAS Calibration

  • RS Stock No. 921-8695
  • Mfr. Part No. 1006-336
  • Manufacturer Megger
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Megger Insulation and Continuity Testers

The Megger MIT400/2 insulation and continuity tester has a redesigned case, back-stand and 6-cell battery compartment with separate fuse access. Insulation testing is enhanced with feedback controlled test voltages to limit over-voltage up to 2%, rather than the industry standards i. e. 10-20%. All the primary results are displayed on the larger digital display and repeated on the analogue arc. Auxiliary test information such as frequency, leakage current, insulation or circuit voltage is displayed in the smaller secondary digital display. A variable range has been added to allow any intermediate voltage from 50V to 1000V in 10V steps where application-specific test voltages are required that do not appear in the standard ranges.

Features and Benefits

Insulation testing up to 1000V and 200Gohm range
Stabilised insulation test voltage (New)
Single range, faster continuity testing from 0.01ohm to 1Mohm (New)
600V TRMS AC and DC voltage measurement
Live circuit detection and protection
User variable insulation test voltage from 100V to 1000V (New) depending on model
Test result storage and Bluetooth downloading depending on model
Rechargeable options for mains and car charging (New) depending on the mode

Applications

Industrial sites
Cable testing
Motor testing
Automotive
ESD
Panel building
Avionics
Maintenance activities

Certifications

CAT IV 600V
IP54 rated

Specifications
Attribute Value
Tester Type Insulation Tester
Minimum Test Voltage 10V
Maximum Test Voltage 1000V
Maximum Insulation Resistance Measurement 200GΩ
Display Type Analogue, Dual Digital
Calibrated UKAS
Test Current 205mA
Battery Life 2200 (OFF) Test @ 55 s, 2200 (ON) Test @ 5 s
Minimum Operating Temperature -20°C
Maximum Operating Temperature +55°C
Power Source Battery
Safety Category Level CAT IV
Safety Category Voltage 600V
Safety Category CAT IV 600 V
Weight 775g
Battery Type Alkaline
Width 50mm
Length 92mm
Model Number p MIT400 2
Dimensions 92 x 50 x 220mm
Height 220mm
Temporarily out of stock - back order for despatch when stock is available
Unit of sale: Each
593.00
(exc. VAT)
729.39
(inc. VAT)
units
Per unit
1 +
€593.00
Related Products
Test box designed to provide confirmation that electrical ...
Description:
Test box designed to provide confirmation that electrical installation testers continue to operate properly, and maintain their accuracy and consistency between calibrations Tests the full range of a testers capability.Does not trip RCD protected circuits.Tests to regulations BS7671, BS EN61557 ...
TESTRANSFO2 is a small, hand held device which ...
Description:
TESTRANSFO2 is a small, hand held device which is used to check the functionality of a tri-phased transformer disconnected from the network Usable on all distribution transformers. It automatically performs a sequence of tests taking only two min to confirm ...
The MX 406 is an insulation and continuity ...
Description:
The MX 406 is an insulation and continuity tester for electrical installations and equipmentDesigned to withstand the stresses of field use, the MX 406 is an indispensable tool for installers, testing organisations and maintenance services.The remote control probe supplied as ...
The KMP7036 Insulation-Continuity Tester is used for accurately ...
Description:
The KMP7036 Insulation-Continuity Tester is used for accurately measuring the insulation of electrical equipment, ensuring that electricity has a direct path to flow safely and there is no risk to those around the area The Isolation Tester can test cables, ...