Megger MIT410 2, Insulation Tester 200GΩ CAT IV 600 V RS Calibration

  • RS Stock No. 921-8718
  • Mfr. Part No. 1006-337
  • Manufacturer Megger
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Megger Insulation and Continuity Testers

The Megger MIT410/2 200Gohm insulation and continuity testers have a redesigned case, back-stand and 6-cell battery compartment with separate fuse access. Insulation testing has been enhanced with feedback controlled test voltages to limit over-voltage to 2%, rather than the industry-standard 10-20%. All primary results are displayed in the larger digital display and repeated on the analogue arc. Auxiliary test information such as frequency, leakage current, insulation or circuit voltage is displayed in the smaller secondary digital display. A variable range has been added to allow any intermediate voltage from 50 V to 1000 V in 10 V steps. Where application-specific test voltages are required that do not appear in the standard ranges.
Supplied with
Hard carry case complete with red/black silicone test lead set with probes, 1 red & 1 black crocodile clip, 1 SP5 Remote Switch Probe, information CD and 6 x AA Alkaline Batteries

Features and Benefits

Insulation testing up to 1000V
Polarisation Index, Dielectric Absorption Ratio, Variable Test Voltage and result storage
Stabilised insulation test voltage (New)
Single range, faster continuity testing from 0.01ohm to 1Mohm (New)
600V TRMS AC and DC voltage measurement
Live circuit detection and protection
User variable insulation test voltage from 100V to 1000V (New) depending on model
Test result storage and Bluetooth® downloading depending on model
Rechargeable options for mains and car charging (New) depending on model

Applications

Industrial
Cable Testing
Motor Testing
Automotive
ESD
Panel Building
Avionics
Maintenance

Certifications

CAT IV 600 V
IP54 rated

Specifications
Attribute Value
Tester Type Insulation Tester
Minimum Test Voltage 10V
Maximum Test Voltage 1000V
Maximum Insulation Resistance Measurement 200GΩ
Display Type Analogue, Dual Digital
Calibrated RSCAL
Test Current 205mA
Battery Life 2200 (OFF) Test @ 55 s, 2200 (ON) Test @ 5 s
Minimum Operating Temperature -20°C
Maximum Operating Temperature +55°C
Power Source Battery
Safety Category Level CAT IV
Safety Category Voltage 600V
Safety Category CAT IV 600 V
Weight 775g
Battery Type Alkaline
Dimensions 92 x 50 x 220mm
Length 92mm
Width 50mm
Height 220mm
Model Number p MIT410 2
Temporarily out of stock - back order for despatch when stock is available
Unit of sale: Each
Was €672.50
633.00
(exc. VAT)
778.59
(inc. VAT)
units
Per unit
1 +
€633.00
Related Products
TESTRANSFO2 is a small, hand held device which ...
Description:
TESTRANSFO2 is a small, hand held device which is used to check the functionality of a tri-phased transformer disconnected from the network Usable on all distribution transformers. It automatically performs a sequence of tests taking only two min to confirm ...
Starter package PROFiTEST INTRO, consisting of PROFiTEST INTRO ...
Description:
Starter package PROFiTEST INTRO, consisting of PROFiTEST INTRO M520T, PRO-Schuko-Measuring-Adapter Z503K, PRO-Jumper Z503J, Universal Carrying Pouch F2010 Z700G, Battery Pack Master Z502H and charger Z502R Measurement of RLO, ZL-PE, ZL-N, RINS, RE, ΔU, phasesequence and voltageOFFSET Management RL-PE / RN-PE ...
Master package PROFiTEST INTRO, consisting of PROFiTEST INTRO ...
Description:
Master package PROFiTEST INTRO, consisting of PROFiTEST INTRO M520T, Test probe with remote release Z550A, Vario-Plug-Set Z500A, Set-Probes Z50F, PROSchuko-Measuring-Adapter Z503K, PRO-Jumper Z503J, SORTIMO L-BOXX Z503D, Foam SORTIMO L-BOXX Z503O, Battery Pack Master Z502H and chargerZ502R Measurement of RLO, ...
The PROFITEST INTRO provides professional electricians with a ...
Description:
The PROFITEST INTRO provides professional electricians with a universal, compact and rugged, state-of-the-art measuring tool The MT520T test instrument is capable of executing all measurements for testing the effectiveness of safety measures in electrical systems as required by IEC 60364-6 ...