Interface Module, Cable Mount, 41 Pole, 250 V, 10A

  • RS Stock No. 365-2020
  • Mfr. Part No. 09210404701
  • Manufacturer HARTING
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

Han D® AV Terminal Blocks

Separate pre-mating earth terminal
Use in conjunction with the bulkhead/panel mount housing to allow a terminal block style wire termination inside the equipment

Approvals

UL, CSA, SEV

//media.rs-online.com/t_line/L365202-01.gif

Han D® AV 10A Terminal Blocks

These Han D® AV inserts are rated at 10A. They are intended for use with housings contained within ranges 7 & 8. These housing ranges are associated to a specific Harting 'Size' number identifier. See the 'compatibility' table for details of this relationship, and stock numbers of housings that are typical of each range.

Warning

  • These connectors should not be mated or unmated under electrical load. Connectors of the same or different types arranged in a line should be polarised to prevent the possibility of wrong connection.
Specifications
Attribute Value
Number of Contacts 41
Mounting Type Cable Mount
Voltage Rating 250 V
Current Rating 10A
Depth 78mm
4 In stock for delivery within 2 working days
Unit of sale: Each
202.23
(exc. VAT)
248.74
(inc. VAT)
units
Per unit
1 - 9
€202.23
10 - 24
€194.14
25 +
€186.05
Related Products
The number of complete mains cycles during fixed ...
Description:
The number of complete mains cycles during fixed repeating periods (typically 1 to 10 seconds) is varied, thus altering the duty cycle or on-/off-time ratio Trigger pulses coincide with the zero-crossing times of the mains supply thus ensuring no RFI ...
This quad-bearing gimbal joystick provides a two-axis resistive ...
Description:
This quad-bearing gimbal joystick provides a two-axis resistive output for controlling parameters such as position, velocity and tilt It can be interfaced to any microcontroller with at least two analogue input channels. 5 kΩ linear-taper potentiometer on each axis Smooth ...
TS32 ’G’ rail and TS35 ’Top Hat’ rail ...
Description:
TS32 ’G’ rail and TS35 ’Top Hat’ rail mounted terminals for use with the BL connector system enabling quick changing of functional units The cable mounted BL units may be fitted to either the top or side of the terminal ...
Output module with 32 relays and 1 x ...
Description:
Output module with 32 relays and 1 x 24Vdc pull-out changeoverLEDs for monitoring supply and relay output statusDirect connection to the ribbon cable by male connector in accordance with IEC 603 1/DIN 41 651.Two-tier screwed terminal blocks.Protection against polarity reversals ...