RS PRO Rope Pull Kit, For Use With All Rope Pull Switches

  • RS Stock No. 239-6820
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

RS Rope Kits for All Rope Pull Switches

Supplied with all fittings and fixtures required to install any rope pull switch, including hazardous area versions
Stainless steel grade 316 and the cable is multi-strand galvanised steel covered with PVC
Two thimbles, collar clamps and "D" shackles are provided for securing each end of the grab wire to the safety switch
Stainless steel tensioner provided for switches that do not have this feature built in
Sufficient M6 eyebolts with locking nuts are provided to support the wire at approximately 2 to 3m intervals
First and last supports should be placed no more than 300mm from the end of the switch to ensure that the pull on the switch is linear
Vital for correct operation to ensure that the wire is free running when pulled
Rope may be cut to any suitable required length

Specifications
Attribute Value
Accessory Type Rope Pull Kit
For Use With All Rope Pull Switches
Size 75m
Grab Wire Clamp Type Collar
1 In stock for delivery within 2 working days
Unit of sale: Each
233.03
(exc. VAT)
281.97
(inc. VAT)
units
Per unit
1 - 9
€233.03
10 - 14
€223.32
15 +
€217.99
Related Products
Our Bulletin 889 DC Micro (M12) Cordsets & ...
Description:
Our Bulletin 889 DC Micro (M12) Cordsets & Patchcords provide secure connections for proximity sensors, limit switches, photoelectric sensors and other field devices Available with straight or right-angle 4- or 5-pin overmolded connectors, these cables feature a choice of materials ...
Our Bulletin 889 DC Micro (M12) Cordsets & ...
Description:
Our Bulletin 889 DC Micro (M12) Cordsets & Patchcords provide secure connections for proximity sensors, limit switches, photoelectric sensors and other field devices Available with straight or right-angle 4- or 5-pin overmolded connectors, these cables feature a choice of materials ...
These safety light beam devices are optoelectronic protection ...
Description:
These safety light beam devices are optoelectronic protection devices They are used to safeguard access areas, danger points or danger zones. The safety light beam devices only comply with EN 61496-1 and IEC 61496-2 in conjunction with their approved evaluation ...
These safety light beam devices are optoelectronic protection ...
Description:
These safety light beam devices are optoelectronic protection devices They are used to safeguard access areas, danger points or danger zones. The safety light beam devices only comply with EN 61496-1 and IEC 61496-2 in conjunction with their approved evaluation ...