Siemens 3SE7920-1AB Eye Bolt, For Use With 3SE7 Rope Pull Switch, 3SF2 Rope Pull Switch

  • RS Stock No. 749-7739
  • Mfr. Part No. 3SE7920-1AB
  • Manufacturer Siemens
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

3SE7 Emergency Grab Wire Switch

The 3SE7 series of grab wire switches (trip wire switches, cable operated switches) are used for monitoring or for EMERGENCY STOP devices on particularly dangerous system sections.
As the effective range of a grab wire switch is only limited by the length of the grab wire, large systems can also be protected. Switches (requiring pulling at both ends) and conveyor belt unbalance trackers are used primarily for monitoring very long belt systems.

Design

The switches for wire lengths up to 50m are available with 1 NO + 1 NC or 2 NC contacts and for up to 75m with 1 NO + 3 NC contacts. The switches for wire lengths of 2 ´ 75m and the conveyor belt unbalance trackers are supplied with 2 NO + 2 NC contacts.
The grab wire switch and the conveyor belt unbalance tracker are also available with a factory fitted LED (red, 24 V DC). This light has innovative on board chip technology that allows the operating state of the switch to be visible at a distance of at least 50m.

Function

The NC contacts of the grab wire switch and the conveyor belt unbalance tracker are positive opening. The grab wire switches with one side operation are held in free position by the pre-tension on the turnbuckle. In the 3SE7 140 and 3SE7 150 grab wire switches, both switching contacts are available for wire-break/wire-pull signalling. The NO contact can be used, for example, for signalling purposes. On switches with interlocking, with a pre-tensioned wire, the locking must be deactivated beforehand in order to return the grab wire switch to its original position.

Positive latching and positive NC contacts
Switches for wire lengths up to 75m
Metal housing
Enclosure is screw mounted
IP65 rating
Operating temperature: -25 to +70°C

Note

Stock nos. 764-4341, 764-4301, 764-4304, 764-4357 are fitted with an indicator light.

Standards

The switches are equipped with positive latching and positive NC contacts and are therefore suitable for operation in EMERGENCY STOP devices in accordance with EN ISO 13850. They are usable up to Category 4 according to EN 954-1.

Approvals

UL,CSA

Specifications
Attribute Value
Accessory Type Eye Bolt
For Use With 3SE7 Rope Pull Switch, 3SF2 Rope Pull Switch
Connector Size M8
41 Within 2 working day(s) (EU stock)
54 Within 2 working day(s) (EU stock)
Unit of sale: Each
8.23
(exc. VAT)
10.12
(inc. VAT)
units
Per unit
1 +
€8.23
Related Products
The Bernstein AG A7 transverse actuator is used ...
Description:
The Bernstein AG A7 transverse actuator is used for applications with a minimum actuating radius of 400mm On actuation, the switching element and actuator are either bought together or separated. Using increased extraction force on the actuator, Bernstein safety switch ...
Our Bulletin 889 DC Micro (M12) Cordsets & ...
Description:
Our Bulletin 889 DC Micro (M12) Cordsets & Patchcords provide secure connections for proximity sensors, limit switches, photoelectric sensors and other field devices Available with straight or right-angle 4- or 5-pin overmolded connectors, these cables feature a choice of materials ...
These safety light beam devices are optoelectronic protection ...
Description:
These safety light beam devices are optoelectronic protection devices They are used to safeguard access areas, danger points or danger zones. The safety light beam devices only comply with EN 61496-1 and IEC 61496-2 in conjunction with their approved evaluation ...
Suitable for use with m Gard Access Locks ...
Description:
Suitable for use with m Gard Access Locks (DM1 Single Key or DM2 Dual Key)Self-aligning actuator offers ±75mm horizontal adjustment and ±3.75mm vertical adjustment.