Siemens 3SE7931-1AE Spring, For Use With 3SE7 Rope Pull Switch, 3SF2 Rope Pull Switch

  • RS Stock No. 764-4363
  • Mfr. Part No. 3SE7931-1AE
  • Manufacturer Siemens
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

3SE7 Emergency Grab Wire Switch

The 3SE7 series of grab wire switches (trip wire switches, cable operated switches) are used for monitoring or for EMERGENCY STOP devices on particularly dangerous system sections.
As the effective range of a grab wire switch is only limited by the length of the grab wire, large systems can also be protected. Switches (requiring pulling at both ends) and conveyor belt unbalance trackers are used primarily for monitoring very long belt systems.

Design

The switches for wire lengths up to 50m are available with 1 NO + 1 NC or 2 NC contacts and for up to 75m with 1 NO + 3 NC contacts. The switches for wire lengths of 2 ´ 75m and the conveyor belt unbalance trackers are supplied with 2 NO + 2 NC contacts.
The grab wire switch and the conveyor belt unbalance tracker are also available with a factory fitted LED (red, 24 V DC). This light has innovative on board chip technology that allows the operating state of the switch to be visible at a distance of at least 50m.

Function

The NC contacts of the grab wire switch and the conveyor belt unbalance tracker are positive opening. The grab wire switches with one side operation are held in free position by the pre-tension on the turnbuckle. In the 3SE7 140 and 3SE7 150 grab wire switches, both switching contacts are available for wire-break/wire-pull signalling. The NO contact can be used, for example, for signalling purposes. On switches with interlocking, with a pre-tensioned wire, the locking must be deactivated beforehand in order to return the grab wire switch to its original position.

Positive latching and positive NC contacts
Switches for wire lengths up to 75m
Metal housing
Enclosure is screw mounted
IP65 rating
Operating temperature: -25 to +70°C

Note

Stock nos. 764-4341, 764-4301, 764-4304, 764-4357 are fitted with an indicator light.

Standards

The switches are equipped with positive latching and positive NC contacts and are therefore suitable for operation in EMERGENCY STOP devices in accordance with EN ISO 13850. They are usable up to Category 4 according to EN 954-1.

Approvals

UL,CSA

Specifications
Attribute Value
Accessory Type Spring
For Use With 3SE7 Rope Pull Switch, 3SF2 Rope Pull Switch
Tensile Force 35N
Temporarily out of stock - back order for despatch 07-08-2020, delivery within 2 working days
Unit of sale: Each
27.92
(exc. VAT)
34.34
(inc. VAT)
units
Per unit
1 +
€27.92
Related Products
The Guardian Line GLS-SS from IDEM are safety ...
Description:
The Guardian Line GLS-SS from IDEM are safety rope pull switches with a stainless steel 316 housing able to withstand the tough environments found in the Food and Pharmaceutical industries The fixing holes are under the cover of the switch ...
The Telemecanique Sensors XY2CJ series emergency stop rope ...
Description:
The Telemecanique Sensors XY2CJ series emergency stop rope pull switch has a 1NC/1NO contact configuration It has Zamak housing and maximum AC/DC voltage is 240VAC and 250VDC respectively and the current rating of the switch is 3A and 270mA for ...
The Preventa XY2CJ emergency stop rope pull switches ...
Description:
The Preventa XY2CJ emergency stop rope pull switches from Telemecanique are designed to prevent injury to people or damage to machinery when a normal emergency stop function is not available They are easy to install and offer a quick visual ...
The Preventa XY2CJ emergency stop rope pull switches ...
Description:
The Preventa XY2CJ emergency stop rope pull switches from Telemecanique are designed to prevent injury to people or damage to machinery when a normal emergency stop function is not available They are easy to install and offer a quick visual ...