RE220-LF, Single Sided DIN 41617 Matrix Board FR4 with 37 x 58 1mm Holes, 2.54 x 2.54mm Pitch, 160 x 100 x 1.5mm

Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): DE
Product Details

Matrixboards, DIN 41612//7 Type

Plated through holes (double sided 321//322 types)
Nominal thickness 1.5mm
Copper thickness 35μm
Hole Pitch 2.54mm (0.1 in)
Hole dia 1.0mm

DIN Type Matrixboard

Matrix boards with 1mm holes on a 2.54mm pitch.

Specifications
Attribute Value
Number of Sides Single Sided
Hole Pitch 2.54 x 2.54mm
Dimensions 160 x 100 x 1.5mm
Length 160mm
Width 100mm
Thickness 1.5mm
Base Material Epoxy Glass Fabric Laminate
Hole Diameter 1mm
FR Material Grade FR4
Hole Layout 37 x 58
Copper Thickness 35µm
Connection DIN 41617
5 Within 2 working day(s) (EU stock)
39 Within 2 working day(s) (EU stock)
Unit of sale: Each
5.63
(exc. VAT)
6.81
(inc. VAT)
units
Per unit
1 - 9
€5.63
10 - 19
€5.27
20 - 49
€5.07
50 +
€4.90
Related Products
Double-sided extender boards for testing Eurocards The extender ...
Description:
Double-sided extender boards for testing Eurocards The extender board plugs directly into a subtrack connector with the unique support/ejector mechanism at the front supporting the board under test. DIN 41612 type B connectors Solder resist coating to prevent solder bridging ...
Adaption circuit board for SO8, SO8w, HSOP8, HTSOP8, ...
Description:
Adaption circuit board for SO8, SO8w, HSOP8, HTSOP8, SOP8Epoxy fibre-glass FR4 150 mm Double-sided 35 μm Cu Plated through holes (PTH)Surface chem. Ni/Au Solder stop mask.
Completely drilled boards, designed for the development of ...
Description:
Completely drilled boards, designed for the development of prototypes of analogue circuitsThanks to the use of APW plugs, these cards are very versatile and allow discreet components to be connected wire-to-wire, or enable plugs and wrap pins to be fitted. ...
Quadratic soldering islands reduce risk of lifting during ...
Description:
Quadratic soldering islands reduce risk of lifting during soldering Simple connections to adjacent soldering islands can also be made. An earth screen on the component side provides maximum shielding. Plug connectors compliant with DIN 41612, types B and C up ...