ON Semiconductor A5191HRTPG-XTD, Modem Single Chip with HART FSK, 3 → 5.5 V, 1200bit/s, 28-Pin, PLCC

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

HART Modems, ON Semiconductor

Highway Addressable Remote Transducer (HART) Modem [A5191HRT]

HART Modem Communications

A range of devices which conform to the HART (Highway Addressable Remote Transducer) industrial communications protocol. HART communications frequently utilize 4-20mA networks and are widely used in Automation and Control applications. The HART standard provides for both point-to-point (analogue or digital) and multi-drop (digital only) modes of operation, the latter using a fixed loop current of 4mA.

Specifications
Attribute Value
Modem Type Single Chip with HART
Modulation Technique FSK
Power Supply Type Single
Typical Operating Supply Voltage 3 → 5.5 V
Maximum Data Rate 1200bit/s
Mounting Type Surface Mount
Package Type PLCC
Pin Count 28
Dimensions 0.456 x 0.456 x 0.156in
Height 3.96mm
Length 11.58mm
Maximum Operating Temperature +85 °C
Width 0.456in
Minimum Operating Temperature -40 °C
64 In stock for delivery within 2 working days
Unit of sale: Each
9.07
(exc. VAT)
11.16
(inc. VAT)
units
Per unit
1 - 9
€9.07
10 - 24
€7.71
25 - 49
€6.81
50 +
€5.89
Packaging Options:
Related Products
The MAX14856/MAX14858 isolated RS-485/RS-422 transceivers provide 5000VRMS (60s) ...
Description:
The MAX14856/MAX14858 isolated RS-485/RS-422 transceivers provide 5000VRMS (60s) of galvanic isolation between the cable side (RS-485/RS-422 driver/ receiver-side) and the UART side of the device Isolation improves communication by breaking ground loops and reduces noise when there are large differences ...
The DG2517E is low-voltage dual single-pole / double-throw ...
Description:
The DG2517E is low-voltage dual single-pole / double-throw monolithic CMOS analog switches Designed to operate from 1.8 V to 5.5 V power supply, the DG2517E achieves a bandwidth of 221 MHz while providing low on-resistance (2.5 ), excellent on-resistance matching ...
The DG2519E is monolithic CMOS dual single-pole / ...
Description:
The DG2519E is monolithic CMOS dual single-pole / double-throw (SPDT) analog switches It is specifically designed for low-voltage, high bandwidth applications. The DG2519E on-resistance, matching and flatness are guaranteed over the entire analog voltage range. Wide dynamic performance is achieved ...
The DG2535E and DG2733E are low voltage, low ...
Description:
The DG2535E and DG2733E are low voltage, low on-resistance, dual single-pole/double-throw (SPDT) monolithic CMOS analog switches designed for high performance switching of analog signals Combining low-power, high speed, low on-resistance, and small package size, the DG2535E and DG2733E are ideal ...