Adafruit 2927 FeatherWing Add-On Board DC Add On Board for ATmega32u4, ATSAM M0, ESP8266 for All Feather Board

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

DC Motor / Stepper Motor FeatherWing

FeatherWings add specific functionality to your Feather development board. They fit directly on top of your Feather using stacking header pins.

The DC Motor / Stepper Motor FeatherWing enables you to add either two bi-polar stepper motors or four brushed DC motors to your Feather project. It uses the I2C (SDA & SCL pins) to control all the motor and speed controls.

You can stack up to 32 wings giving you a maximum of 64 steppers or 128 DC motors. Supported by the Arduino software library.

- 4 full H-Bridges with 1.2A per bridge complete with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5 V dc to 13.5 V dc.
- Up to 4 bi-directional DC motors with individual 12-bit speed selection (roughly 0.02% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping.
- Motors automatically disabled on power-up
- 3.5 mm terminal block connectors (18-26 AWG)
- Polarity protected 2-pin terminal block and jumper to connect external power, for separate logic/motor supplies
- Board dimensions: 50.8 x 22.9 x 1.6 mm / 2" x 0.9" x 0.06"
- Weight: 4.6 g

Adafruit FeatherWing Add-On Boards

Specifications
Attribute Value
Kit Name FeatherWing Add-On Board
Kit Classification Add On Board
For Use With All Feather Board
Motor Type DC
Featured Device ATmega32u4, ATSAM M0, ESP8266
11 In stock for delivery within 2 working days
Unit of sale: Each
17.93
(exc. VAT)
22.05
(inc. VAT)
units
Per unit
1 - 4
€17.93
5 - 9
€17.39
10 +
€17.04
Related Products
Description:
The Haptic click is an add-on board that driver ERM (Eccentric Rotating Mass) and LRA (Linear Resonant Actuator) vibration motors A Motor Haptic Driver (Texas Instruments DRV2605L) includes a haptic-effect library with over 100 haptic effects. Audio interface (3.5 mm ...
The STEVAL-ESC001V1 is an electronic speed controller (ESC) ...
Description:
The STEVAL-ESC001V1 is an electronic speed controller (ESC) board for a three-phase Brushless motor (BLDC/PMSM) It demonstrates a sensorless FOC algorithm with speed regulation and active braking. The board is designed to provide fast and efficient propulsion for remote control ...
The X-NUCLEO-IHM07M1 is a three-phase Brushless DC motor ...
Description:
The X-NUCLEO-IHM07M1 is a three-phase Brushless DC motor (BLDC) driver expansion board based on the L6230 device The L6230 driver is optimized for six-step and FOC algorithms thanks to independent current sensing. • Operating voltage range: +8 to +48Vdc • ...
The X-NUCLEO-IHM11M1 is a low-voltage three-phase brushless DC ...
Description:
The X-NUCLEO-IHM11M1 is a low-voltage three-phase brushless DC (BLDC) motor driver expansion board based on the STSPIN230 triple half-bridge chip The device is designed for battery-powered applications and can be forced into a zero-consumption state, yielding a significant increase in ...