Unipower 5 → 60 A Motor Load Transducer, 24 V dc, -15 → +50 °C

  • RS Stock No. 793-4102
  • Mfr. Part No. APM10
  • Manufacturer Unipower
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DK
Product Details

APM10 - kW-Transmitter

The APM10 is a monitor- and protection unit for motors. The unit converts kW into an analogue process signal for use in PLC's and other controllers.

Transmitter for kW, 3 phase symmetrical load
For connecting to a 3 phase net of up to 3x500 Vac
Internal Current Transformer
Input Current Range 5, 10, 20, 25, 40, 60 Aac
24 V Power Supply
Analogue output 0(4)-20mA or 0(2)-10V
DIP switch settings for output signal
Galvanic insulation between input and output
Test Voltage 3 kV

Unipower Motor Protection

Specifications
Attribute Value
Motor Protection System HC
Motor Protection Component Load Transducer
Number of Inputs 4
Output 1
Sensing Type Thermistor
Supply Voltage 24 V dc
Current Rating 5 → 60 A
Overall Length 86mm
Overall Width 36mm
Overall Depth 58mm
Minimum Operating Temperature -15°C
Maximum Operating Temperature +50°C
Size D 58 x W 36 x H 86mm
Series APM
Enclosure Type Lexan UL94V-0 (Upper), Noryl UL94V-0 (Lower)
2 In stock for delivery within 2 working days
Unit of sale: Each
252.08
(exc. VAT)
310.06
(inc. VAT)
units
Per unit
1 +
€252.08
Related Products
The load power monitor achieves effective protection for ...
Description:
The load power monitor achieves effective protection for three-phase motors in critical applications, guarding against nuisance trips because of voltage fluctuations,Reliable detection of overload or underload operating conditions is achieved by measurement of this true power. Independent settings for power ...
Units which measure true motor load in kW ...
Description:
Units which measure true motor load in kW featuring a digital display of kW% and programmable trips for over and/or under load eventsThese units protect equipment from damage caused by the motor running against a jam, blockage or under load ...
Can be used with all motors equipped with ...
Description:
Can be used with all motors equipped with PTC thermistor probes It monitors windings temperature and ensures that the rated operating value is not exceeded, therefore guarding against faults which are often the cause of premature ageing. They can also ...
The PAIR module is designed for use with ...
Description:
The PAIR module is designed for use with induction motors that require protection against both overload and underload conditions Overcurrent sensing with inverse time delay response Sensitive underload protection by power factor measurement Integral current transformer up to 32ACurrent range ...