Microchip SEC1210-I/PV-URT, Multiprotocol Transceiver, EMV 4.2/4.3, ETSI TS 102 221, ISO/IEC 7816, PC/SC, 12MBps, 24-Pin

  • RS Stock No. 111-5579
  • Mfr. Part No. SEC1210-I/PV-URT
  • Manufacturer Microchip
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

SEC1110/1210 Smart Card to USB/SPI/UART Bridges

The Microchip SEC1110/1210 family of devices are Smart Card Bridge ICs with USB, SPI and UART interfaces. Through an effective combination of hardware and software the SEC1110 and SEC1210 offer a high-performance customisable solution. The SEC1110/1210 devices are certified to the latest USB and EMV standards to ensure interoperability with the latest and legacy Smart Card systems alike.

To simplify the development of custom USB-based applications these devices integrate USB Chip Card Interface Device (CCID) firmware. Also on-board is One-Time Programmable memory which can be utilised to host custom firmware or device data.


Fully compliant with Smart Card standards: ISO/IEC 7816, EMV 4.2/4.3, ETSI TS 102 221 and PC/SC
USB, SPI or UART host interface
Dedicated hardware for performance
Low standby and dynamic power
OTP memory for code and custom configuration data
Versatile ETU rate generation, supporting current and proposed rates (to 826 Kbps and beyond)

USB (Universal Serial Bus) - Microchip

Attribute Value
Data Rate 12Mbps
Mounting Type Surface Mount
Package Type QFN
Pin Count 24
Transmitter Signal Type Single Ended
Receiver Signal Type Differential
Interface Standards EMV 4.2/4.3, ETSI TS 102 221, ISO/IEC 7816, PC/SC
Power Supply Type Single
Typical Single Supply Voltage 3.6 → 5.5 V
Maximum Operating Temperature +85 °C
Length 5.1mm
Dimensions 5.1 x 5.1 x 0.95mm
Minimum Operating Temperature -40 °C
Width 5.1mm
Height 0.95mm
996 In stock for delivery within 2 working days
Unit of sale: Each (In a Pack of 2)
(exc. VAT)
(inc. VAT)
Per unit
Per Pack*
2 +
*price indicative
Packaging Options:
Related Products
The System Controller Hub (SCH) is a component ...
The System Controller Hub (SCH) is a component of Intel® Atom™ processor technology The SCH combines functionality normally found in separate GMCH (integrated graphics, processor interface, memory controller) and ICH (on-board and end-user I/O expansion) components into a single component ...
The MEC1428 is the latest member of the MEC14XX family and adds a new level of design functionality for computing engineers by adding Slave Attached Flash (SAF), which is an optimal solution for USB Type-C™ power delivery The MEC1428 device ...
USB is a cable bus supporting data exchange ...
USB is a cable bus supporting data exchange between a host computer and a wide range of simultaneously accessible peripherals There is a differential signal data interface for transmit and receive communication path. The bus includes power at 5 Volts. ...
The FUSB302 targets system designers looking to implement ...
The FUSB302 targets system designers looking to implement a DRP/SRC/SNK USB Type-C connector with low amount of programmabilityThe FUSB302 enables the USB Type-C detection including attach, and orientation. The FUSB302 integrates the physical layer of the USB BMC power delivery ...