Allen Bradley 3 Pole Panel Mount Non Fused Isolator Switch - 32 A Maximum Current, 15 kW Power Rating, IP65

  • RS Stock No. 261-7565
  • Mfr. Part No. 194E-E32-1753-6N
  • Manufacturer Allen Bradley
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
Product Details

Switch Disconnectors (Front Mounting)

These switches fully conform to IEC204, VDE 0660 and IEC947 and are UL,CSA approved. A full range of accessories is available.

Manufactured from thermo-resistant and self-extinguishing materials (UL94-VØ) which are free from Cadmium, Halogen and Asbestos

Note

Refer to product description AC23A rating for Technical Specification differential. 3 pole versions supplied complete with handle.

//media.rs-online.com/t_line/LI261755-01.gif

Allen Bradley MCS Range

The 194E switch disconnector range forms part of the Modular Control System (MCS) 9mm grid system and similarly features compact design, modularity and extensive choice, all switch materials can be recycled. Universal terminal screws are fitted for ’Pozidriv’ or flat blade screwdriver. The switching category is AC23A.

Specifications
Attribute Value
Number of Poles 3
Maximum Current 32A
Mounting Type Panel Mount
Power Rating 15kW
IP Rating IP65
Accepts Padlocks Yes
Voltage Rating 690V ac
Electrical Phase 3
Switch Rating 15kA
Length 90mm
Width 45mm
Depth 60mm
Terminal Type Wire Lead
Handle Colour Black/Grey, Red/Yellow
Maximum Operating Temperature +60°C
Minimum Operating Temperature -25°C
2 Within 1 working day(s) (IE stock)
57 Within 2 working day(s) (EU stock)
Unit of sale: Each
42.20
(exc. VAT)
51.06
(inc. VAT)
units
Per unit
1 +
€42.20
Related Products
All CBEs have blade terminals and have an ...
Description:
All CBEs have blade terminals and have an insulation resistance greater than 100MΩ (Mega Ohms) Insulation Resistance >100MΩThe convenience of on/off switching and overcurrent protection in one package Visual indication of breaker state via the unique, single shot moulded, two ...
The enclosure in the OTP series is using ...
Description:
The enclosure in the OTP series is using a rigid glass reinforced polycarbonate enclosure The enclosure is UV protected, protected against low-pressure water jets, and hence built for outdoor and indoor use. The cable entries are threaded and have knock ...
15mm stainless steel Grade 316, satin polish finish ...
Description:
15mm stainless steel Grade 316, satin polish finish enclosure to IP65Lockable with up to four padlocks in the OFF position All units have one N/O early break/late make auxiliary contact Neutral terminal not included Nominal switching voltage 690V.
The 194E switch disconnector range forms part of ...
Description:
The 194E switch disconnector range forms part of the Modular Control System (MCS) 9mm grid system and similarly features compact design, modularity and extensive choice, all switch materials can be recycled Universal terminal screws are fitted for ’Pozidriv’ or flat ...