3 Pole Enclosed Non Fused Isolator Switch, NO, 32 A, 15 kW, IP65

  • RS Stock No. 393-9759
  • Mfr. Part No. P1-32/I2H/SVB
  • Manufacturer Eaton
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Eaton Enclosed Isolator Switch

Eaton's isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a circuit through the rotation of the rotary handle and locking ring. This type of non-fused isolator switch will be found isolating circuit breakers, transmission lines, transformers and a multitude of other applications.

Features & Benefits

• The perfect solution for installing as a safety measure
• Used as an emergency switching off/emergency stop device
• The basic functions: used as a main switch, maintenance switch or manual override switch
• Thermoplastic, high impact surface mounting enclosure with an IP65 rating - this means that the enclosure part of the isolator has ingress protection against dust and is also protected against low-pressure jets of water that comes from all directions
• Built-in earth commoning block
• Lockable in the 0/OFF position, with up to three padlocks
• Totally insulated
• Red rotary handle and yellow locking ring, providing an aesthetically pleasing finish

What is the difference between a fused switch disconnector and a non-fused switch disconnector?

Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary to disconnect or isolate a circuit.

Note

Switch power/capacity refers to AC23A use at 380-440V

Specifications
Attribute Value
Number of Poles 3
Maximum Current 32 A
Mounting Type Enclosed
Normal State Configuration NO
Power Rating 15 kW
IP Rating IP65
Accepts Padlocks Yes
Voltage Rating 440 V ac
Auxiliary Contacts Available Yes
Electrical Phase 3
Switch Rating 640 A
Length 160mm
Width 100mm
Depth 80mm
Terminal Type Screw
Handle Colour Red
Throw Configuration Single
Minimum Operating Temperature -25°C
Maximum Operating Temperature +50°C
4 Within 1 working day(s) (IE stock)
269 Within 2 working day(s) (EU stock)
Unit of sale: Each
44.13
(exc. VAT)
54.28
(inc. VAT)
units
Per unit
1 - 4
€44.13
5 - 9
€42.33
10 +
€41.38
Related Products
Thermoplastic surface mounting enclosure with M25 cable entries ...
Description:
Thermoplastic surface mounting enclosure with M25 cable entries Metric cable glands can be fitted Ingress protection to IP65 (IP54 with cable fitted)Two or three-position rotary switches: Changeover without OFF, Changeover with OFF, ON/OFFM20 on 20A switches/M25 on 25A and 32A/M20, ...
iSW switch-disconnectors for control of opening and closing ...
Description:
iSW switch-disconnectors for control of opening and closing of circuits under load Rating: 20 to 125 A Visi Safe for safe operation and maintenance work on circuit protection Available options: state indication; sealable terminal shield, rotary handle, padlocking device.
This range of DMM enclosed switch-disconnector has a ...
Description:
This range of DMM enclosed switch-disconnector has a reinforced polycarbonate housing, robust and chemically resistant for reliability in extremely harsh industrial environments The seal on the housing is high quality and rated to an IP65 level of ingress protection ensuring ...
The Eaton P1 series of switch-disconnectors with metal ...
Description:
The Eaton P1 series of switch-disconnectors with metal extension shafts are compact and robust, ideal for hard-wearing industrial environments, with a rated uninterrupted current of up to 32 Amps • Featuring extension shafts, the Eaton P1 switches can be mounted ...