3 Pole DIN Rail Non Fused Isolator Switch, 25 A, 7.5 kW, IP65

  • RS Stock No. 805-5584
  • Mfr. Part No. P1-25/XM
  • Manufacturer Eaton
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Eaton Non-Fused Switch Disconnectors - P1 Series Isolators

The P1 series of switch-disconnectors are compact and robust, they are ideal for hard-wearing industrial environments with a rated uninterrupted current of up to 32 Amps. This range of isolator switches from Eaton is suitable for use in applications where there is a need to disconnect electrical equipment from the circuit. The need for this form of local isolation is most commonly needed for repair and maintenance of the electrical equipment on the de-energised circuit. These disconnect switches can also be used as safety switches.

• Preforms local isolation, manual override & safety switch functions

What is the difference between a fused switch disconnector and a non-fused switch disconnector?

Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary to disconnect or isolate a circuit.

Eaton P1-25/XM

Eaton's isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained.

• The perfect solution for installing as a safety measure
• Used as an emergency switching off/emergency stop device
• The basic functions are when used as a main switch, maintenance switch or manual override switch
• 3 pole
• Auxiliary contact or neutral conductor must be fitted by the user
• IP65 rating - this means that the enclosure part of the isolator has ingress protection against dust and is also protected against low-pressure jets of water that comes from all directions
• Rear mounting
• Features an ambient operating temperature of -25 to +50 °C
• Has a mechanical shock resistance of 15 g
• M4 screw terminal
• Rear mounting

Specifications
Attribute Value
Number of Poles 3
Maximum Current 25 A
Mounting Type DIN Rail
Power Rating 7.5 kW
IP Rating IP65
Accepts Padlocks Yes
Voltage Rating 690 V
Auxiliary Contacts Available Yes
Electrical Phase 3
Switch Rating 25 A
Length 49mm
Width 70mm
Depth 75mm
Minimum Operating Temperature -25°C
Maximum Operating Temperature +50°C
Throw Configuration Single
Terminal Type Screw
88 In stock for delivery within 2 working days
Unit of sale: Each
22.23
(exc. VAT)
27.34
(inc. VAT)
units
Per unit
1 - 4
€22.23
5 - 9
€21.32
10 +
€20.84
Related Products
The new 5TL1 On/Off switches are used for ...
Description:
The new 5TL1 On/Off switches are used for the switching of lighting, motors and other electrical devices Rated currents range between 32 A and 125 A. The new design of the 5TL1 On/Off switches allows them to be optically perfectly ...
High impact polycarbonate enclosures to IP65Lockable with up ...
Description:
High impact polycarbonate enclosures to IP65Lockable with up to four padlocks in the OFF position Versions available with N/O early break auxiliary contacts Earth terminal provided, neutral terminal not included Aux contact not feasible in 3 pole units160A unit fitted ...
The switches fully conform to IEC204, VDE 0660 ...
Description:
The switches fully conform to IEC204, VDE 0660 and IEC947 and are UL,CSA approved Manufactured from thermo-resistant and self-extinguishing materials (UL94-VØ) which are free from Cadmium, Halogen and Asbestos.
These narrow format 194E series switch disconnectors are ...
Description:
These narrow format 194E series switch disconnectors are simple to install in limited panel space, they are easily modified and versatile to apply They have finger safe design to IP20 in all live parts and the terminals, which provide self-centring ...