onsemi, FOD8480OS Optocoupler
- RS Stock No.:
- 195-8848
- Mfr. Part No.:
- FOD8480
- Manufacturer:
- onsemi
Stock check temporarily unavailable - call for stock availability
Added
Price Each (In a Pack of 10)
€1.614
(exc. VAT)
€1.985
(inc. VAT)
| Units | Per unit | Per Pack* |
| 10 - 10 | €1.614 | €16.14 |
| 20 - 40 | €1.345 | €13.45 |
| 50 + | €1.241 | €12.41 |
| *price indicative | ||
- RS Stock No.:
- 195-8848
- Mfr. Part No.:
- FOD8480
- Manufacturer:
- onsemi
Technical data sheets
Legislation and Compliance
Product Details
The FOD8480 and FOD8482 are low power optocouplers, which support isolated interface to Intelligent Power Module (IPM) communicating digital control signals from the controller to the IPM, without conducting ground loops or hazardous voltages.
The FOD848x Series, packaged in a stretched body 6−pin small outline plastic package, consists of an aluminium gallium arsenide (AlGaAs) light emitting diode and an integrated high gain photo detector. The detector has a detector threshold with hysteresis. The hysteresis provides differential mode noise immunity and eliminates the potential for output signal chatter. Its non−inverting output is designed as totem pole, which does not require any pull−up resistor.
The FOD8482 has a lower threshold input current, IFLH, at 3.0 mA maximum.
The FOD848x Series, packaged in a stretched body 6−pin small outline plastic package, consists of an aluminium gallium arsenide (AlGaAs) light emitting diode and an integrated high gain photo detector. The detector has a detector threshold with hysteresis. The hysteresis provides differential mode noise immunity and eliminates the potential for output signal chatter. Its non−inverting output is designed as totem pole, which does not require any pull−up resistor.
The FOD8482 has a lower threshold input current, IFLH, at 3.0 mA maximum.