Testec TT-SI 9110 Oscilloscope Probe, Probe Type: Active, Differential 100MHz 1kV 1:100, 1:1000

  • RS Stock No. 448-4351
  • Mfr. Part No. 15120
  • Manufacturer Testec
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): TW
Product Details

Testec oscilloscope probes

The Testec is an active differential oscilloscope probe that enables a conventional oscilloscope to display and measure in-circuit waveforms that are referenced to high common-mode voltages. It is capable of safely measuring differential voltages up to ±1000V AC and 1400VAC/DC. It supports bandwidths up to 100MHz.
Supplied with:
Probe
4 x AA batteries
Instructions (also supplied with 9101: mains adapter and storage case)

Features and Benefits

Bandwidth is DC to 100MHz
Attenuation is 1:100/1:1000
Rise time is 3.5ns
Differential mode input voltage is 1:100 ±140V (DC + peak AC) or 140Vrms 1:1000 ±1400V (DC + peak AC) or 1000Vrms
Input impedance is 4Mohm ll7pF each side to ground
Common mode voltage range is ±1400V(DC + Peak AC) or 1000Vrms at 1/00 & 1/1000
Non-destructive Max input voltage is 1:100 ±1400V (DC + peak AC) or 1000Vrms 1:1000 ±1400V (DC + peak AC) or 1000Vrms
CMRR (typical) is -80dB at 60Hz and -50dB at 1MHz
Offset (typical) is <±5mV
Noise (typical) is 0.9mVRMS

Applications

Performance conversion
Inverters
Motor speed indicators
Switch mode power supplies

Certifications

CAT III 1000VAC
CAT III 1400V

Specifications
Attribute Value
Probe Type Active, Differential
Attenuation 1:100, 1:1000
Bandwidth 100MHz
Maximum Common Mode Input Voltage 1kV
Connector Type BNC
Model Number p TT-SI 9110
Safety Category Level CAT III
Safety Category Voltage 1000 V ac, 1400 V ac/dc
Series SI
Safety Category CAT III 1000 V ac, CAT III 1400 V
Rise Time 3.5ns
2 Within 2 working day(s) (EU stock)
12 Within 2 working day(s) (EU stock)
Unit of sale: Each
577.81
(exc. VAT)
699.15
(inc. VAT)
units
Per unit
1 +
€577.81
Related Products
Bandwidth DC-70 MHz Rise time ≤5 nsDC accuracy ...
Description:
Bandwidth DC-70 MHz Rise time ≤5 nsDC accuracy ±2%Attenuation ratio 50 X/500 XMaximum differential test voltage (DC + Peak AC) 50 X: 150 V, 500 X: 1500 VMaximum input common mode voltage (voltage-to-earth Vrms) 600 V CATIII, 1000 V CATIIInput ...
The Teledyne Le Croy oscilloscope probe is affordable ...
Description:
The Teledyne Le Croy oscilloscope probe is affordable and optimally designed for measurement of small signals floating on an HV bus in power electronics designs or for EMC, EFT, ESD and RF immunity testing sensor monitoring It far surpasses the ...
The Tektronix differential active oscilloscope probe offers truer ...
Description:
The Tektronix differential active oscilloscope probe offers truer signal reproduction and fidelity for high-frequency measurements With ultra-low input capacitance and the versatile device under test connection capabilities, it has excellent high-speed electrical and mechanical performance required for ...
The Tektronix high voltage differential oscilloscope probe provides ...
Description:
The Tektronix high voltage differential oscilloscope probe provides an excellent high-speed electrical and mechanical performance required for Switch Mode Power Supply (SMPS), CAN/LIN Bus and high-speed digital system designs Bandwidth is DC to 1GHz Attenuation is 50:1/5:1 Rise time is ...