LeCroy ZD200 Oscilloscope Probe, Probe Type: Active, Differential 200MHz 60V

Technical data sheets
Legislation and Compliance
RoHS Status: Exempt
COO (Country of Origin): US
Product Details

Teledyne LeCroy oscilloscope probes

The Teledyne LeCroy oscilloscope probe offers a wide dynamic range of ±20V and a common-mode range of ±60V to allow a broad application use. The probe sensitivity and offset are automatically optimized based on the oscilloscope gain settings, so control is transparent to the user. When used with a LeCroy digital oscilloscope, no external power supply is required. Differential probes measure the difference in voltage of a test point with another test point.
Supplied with:
Adapted probe leads and tips
Instruction manual
Certificate of calibration
Supplied with:
Y lead set
6x straight tip
2x hook clip
2x micro IC clips
2x Micrograbber
2x extension lead (5cm)
2x extension lead (10cm)
2x dual-pin set (12.8mm)
2x dual-pin set (16.8mm)
Instruction manual
Certificate of calibration

Features and Benefits

Bandwidth is DC to 200MHz
Attenuation ratio is 1:1
Input impedance is 1Mohmll 3.5pF
Input differential range ±20V
Common Mode Range is ±60V
CMRR (typical) is 80dB at 60Hz and 50dB at 10MHz
It provide the best signal fidelity and minimize peaking and other undesirable effects often introduced with probe tips and leads
Complete accessory kit consisting of 3 seta of grabbers, one alligator clip, 2 sets of leads and 2 tip option for probing a variety of test points
Risetime 10–90% (Typical): 1.75ns

Applications

Automotive development
Failure analysis

Specifications
Attribute Value
Probe Type Active, Differential
Attenuation 1:1
Bandwidth 200MHz
Maximum Common Mode Input Voltage 60V
Model Number p ZD200
Series ZD
Rise Time 1.75ns
Temporarily out of stock - back order for despatch 26-10-2020, delivery within 2 working days
Unit of sale: Each
2,090.00
(exc. VAT)
2,528.90
(inc. VAT)
units
Per unit
1 +
€2,090.00
Related Products
The Tektronix MDO3000 series 200MHz mixed domain oscilloscope ...
Description:
The Tektronix MDO3000 series 200MHz mixed domain oscilloscope offers a 9inch WVGA widescreen colour display This product has 4 analogue channels. This oscilloscope is multi-functional with integrated a basic spectrum analyser, wave inspector navigation, MSO, serial and parallel bus triggering ...
The N2784A single arm probe positioner (134-6160) and ...
Description:
The N2784A single arm probe positioner (134-6160) and N2785A 2-arm probe positioner (134-6162) provide quick and stable X-Y positioning with only a “lift and drop” motion to put the probe in place for PC boards and devices that require hands-free ...
The Teledyne Le Croy oscilloscope probe is affordable ...
Description:
The Teledyne Le Croy oscilloscope probe is affordable and optimally designed for measurement of small signals floating on an HV bus in power electronics designs or for EMC, EFT, ESD and RF immunity testing sensor monitoring It far surpasses the ...
High quality passive voltage probes suitable for use ...
Description:
High quality passive voltage probes suitable for use with Tektronix oscilloscopes or as general purpose replacements Each probe features compensation trimmers to allow matching to instruments. Supplied complete with accessories Rated voltage CAT II 300V rms, CAT I 400V rms. ...