Hanna Instruments HI-7061 Water Analysis Calibration Solution, 460mL Bottle

Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
Product Details

Hanna Instruments pH & Water Analysis Electrode Cleaning and Storage Solutions

Accessories for Electrodes, Hanna Instruments offer solutions ideal for maintenance, calibration and storage. Made with chemicals that are traceable and conform to international standards. Preventing premature failure and reliable and accurate pH measurement their cleaning and storage solutions are of high quality.

Cleaning Solution:

Used for cleaning the liquid junction of electrodes, regular maintenance with this cleaning solution prevents clogging which often leads to inaccurate readings. Containing Hydrochloric Acid 0.034%, protective equipment should be used as per the manufacturers guidelines. Supplied in a 460ml bottle.

Storage Solution:

Used to store the glass probes and re-calibrate meters, the storage solution is a buffer with antibacterial properties. This solution is prepared with high grade Potassium Chloride and Potassium hydrogen Phthalate by titration with NIST 2201 standardised Silver Nitrate and NIST 84j standardised Sodium Hydroxide Solution respectively. Supplied in a 460ml bottle.

Note: Never store Electrodes in distilled or deionized water.

Frequently asked questions:

How often should you clean Electrodes?

Hard waters, viscous and dirty samples are two of the many reasons Electrodes need regular cleaning. Cleaning should be a regular preventative maintenance procedure to prevent premature electrode failure, ideally once a day or at least once per week. Maintenance should be carried out regularly or as soon as build up has been detected.

How to know if an Electrode needs cleaning:

Noise - If readings fluctuate the junction could be clogged or dirty and may need cleaning.

Dry Membrane/Junction or Low Slope - The Electrode will need soaking in a storage solution.

No Slope - If the pH meter reads the same value constantly there could be cracks and an electrode replacement would be needed as apposed to cleaning.

Slow Response/Excessive drift - The tip will need soaking in a cleaning solution, and then a storage solution to re-calibrate the meter.

Always follow manufacturers instructions for Electrode cleaning and storage.

Specifications
Attribute Value
Solution Type Cleaning
Pack Quantity 460ml
Pack Type Bottle
34 In stock for delivery within 2 working days
Unit of sale: Each
16.00
(exc. VAT)
19.68
(inc. VAT)
units
Per unit
1 +
€16.00
Related Products
Di St 3: Water conditioning (softener, demineralisation, aquariums, ...
Description:
Di St 3: Water conditioning (softener, demineralisation, aquariums, pollution control),Di St 4: Agriculture, horticulture, hydroponics, cooling towers, boiling and steam heating plants, water purification,Pure H2O: Pure water, distilled and de-ionised water, steam cleaning, PCB washing, battery checking High ...
Microprocessor based testers for determination of electrical conductivity ...
Description:
Microprocessor based testers for determination of electrical conductivity or Total Dissolved Solids within liquids All units equipped with a custom microprocessor, guaranteeing high accuracy and linearity over the measurement range Automatic calibration function Automatic temperature compensation Primo 2 measures ...
A micro-processor based pH and temperature bench meter, ...
Description:
A micro-processor based pH and temperature bench meter, capable of measuring pH levels whilst also compensating for temperature effect The HI 2211 can also be used for Oxidation Reduction Potential (ORP) in the mV range and ion concentration (ISE).Designed with ...
460ml robust plastic screw top bottles containing: High ...
Description:
460ml robust plastic screw top bottles containing: High quality potassium chloride concentrates Standardised and calibrated with high purity NIST999 KCL in deionised water Confirmed by NIST 2201 standardised silver nitrate solution Each bottle labelled with lot number and expiry date. ...