Pipe & Thread Sealant Paste for Pipe Sealing. 250 ml Tube, -50 → +150 °C

  • RS Stock No. 918-6881
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

RS Pro Pipe & Thread Sealants

The RS Pro anaerobic pipe and thread sealant paste has been designed to lock and seal medium to coarse pipes that are either straight or tapered. The low to medium strength single component paste prevents loosening and leakage through your pipe threads.

Features and Benefits

Cures when confined in the absence of air between close-fitting metal surfaces
High viscosity
High lubricity
Medium strength break torque
Lower prevail torque on assembled joints

Note

Anaerobic adhesives and sealants are not recommended for use in pure oxygen or chlorine lines.

Specifications
Attribute Value
Application Pipe Sealing
Colour Yellow
Strength Low to Medium
Minimum Operating Temperature -50°C
Maximum Operating Temperature +150°C
Package Size 250 ml
Product Form Paste
Chemical Ingredients Dimethacrylate
Package Type Tube
Anaerobic Yes
Cure Time 24 h
Viscosity Measurement 35000 → 60000cP/s
Tensile Strength 0.2N/cm
Odour Lingering Methacrylate, Slightly Sweet
Specific Gravity 1.12
Chemical Composition Dimethacrylate
Operating Temperature Range -50 → +150 °C
Discontinued product
Related Products
An off-white, non-setting compound with good adhesion and ...
Description:
An off-white, non-setting compound with good adhesion and gap filling propertiesUnaffected by vibration but can be easily releasedIdeal for use on all threaded and face joints on pipe work carrying natural gas, LPG, propane, butane, air, oils and aliphatic solventsResistant ...
General purpose flange sealantTypical applications include hydraulic and ...
Description:
General purpose flange sealantTypical applications include hydraulic and pneumatic control valves, transmission and engine flanges and marine pipe workThixotropic to avoid run-off during vertical applicationCures rapidly to give a high pressure seal, which resists most industrial fluids and gasesResistant to ...
Lower strength threadlocking grade for fasteners requiring subsequent ...
Description:
Lower strength threadlocking grade for fasteners requiring subsequent adjustmentDistinctive purple colour to aid identificationThixotropic to prevent migration from the point of applicationLubricates threads during assemblyEasy to remove componentsIdeal for non-ferrous components e.g. brass and aluminium.
Non-setting adhesive designed for locking and sealing pipe ...
Description:
Non-setting adhesive designed for locking and sealing pipe threads.Replaces PTFE tapeTo 93/112/EC; 67/548/EEC; 1999/45/EC standardsQuick and easy to useGives instant low pressure sealNon setting allows joints to be dismantled easilyNot suitable for use on plastic fittings.