RS PRO Beige Polyetheretherketone PEEK Rod, 300mm x 40mm Diameter

  • RS Stock No. 770-715
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

Victrex® PEEK 450G

Typical applications include valve seats in steam and water mixers, components in a high temperature diesel engine turbo actuators etc.

Continuous working temperature approx 250°C
No significant degradation in steam or high pressure water environments
Can absorb over 1000 Mrads of radiation without appreciable loss of mechanical properties
Excellent resistance to a wide range of organic and inorganic liquids, and resistant to all common solvents
Fawn in colour

Note

No. Per Lot is 1

Standards

DIN 53479; DIN 53765; DIN 53765-D-10; ASTM-D 1929

Specifications
Attribute Value
Colour Beige
Length 300mm
Material PEEK
Form Rod
Rod Diameter 40mm
Density 1.32g/cm³
Tensile Strength 95 MPa
Flammability Rating UL 94 V-0
Elongation 25%
Water Absorption 0.5%
Hardness M 99 Rockwell
Maximum Operating Temperature +260°C
7 In stock for delivery within 2 working days
Unit of sale: 1 Lot of 1
179.99
(exc. VAT)
221.39
(inc. VAT)
Lot(s)
1 - 2
€179.99
3 - 5
€167.39
6 - 11
€158.40
12 +
€143.99
Related Products
Macor® is a registered trademark of Corning Inc. ...
Description:
Macor® is a registered trademark of Corning Inc. For the manufacture of precision components utilising ordinary metalworking tools. No post firing required. Non-wetting, 0% porosity and no deformation. Max no load temperature: 1000°CContinuous operating temperature: 800°CMachining tolerances approach 0.013mm ...
Typical frictional coefficient half that of other lubricated ...
Description:
Typical frictional coefficient half that of other lubricated nylons. High resistance to water absorbtion. Excellent hardness, durability and creep resistance qualities. Free cutting properties enable tight machining tolerances. Suitable for bearing, bush, roller and wheel applications. Green in colour.
Modified by addition of Molybdenum Disulpide. Low friction ...
Description:
Modified by addition of Molybdenum Disulpide. Low friction and self-lubricating. Capable of high temperatures and high mechanical strength. High abrasive and ultra-violet light resistant. Suitable for bushes, bearings, gears and wheels etc.,Nylon 66 is unaffected by chlorinated hydrocarbons. Weak acids ...
Easily welded/bonded. Very good electrical insulation. Easily machined/polished. ...
Description:
Easily welded/bonded. Very good electrical insulation. Easily machined/polished. Not resistant long term to hot water (60°C)High storage stiff thermoplastic. Excellent sliding properties/wear and abrasion resistant. Acid, solvent and chemical resistant. For all bearing, bush, gear, insulator applications. Opaque.