RS PRO Green Nylon Rod, 1m x 40mm Diameter

  • RS Stock No. 771-184
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

Oil Filled Nylon

Typical frictional coefficient half that of other lubricated nylons
High resistance to water absorbtion
Excellent hardness, durability and creep resistance qualities
Free cutting properties enable tight machining tolerances
Suitable for bearing, bush, roller and wheel applications
Green in colour

Note

Due to the manufacturing process, these products have a surface tolerance of up to +3mm above the stated thickness

Specifications
Attribute Value
Colour Green
Length 1m
Material Nylon
Form Rod
Rod Diameter 40mm
Density 1.15g/cm³
Tensile Strength 70 MPa
Flammability Rating UL 94 HB
Water Absorption 6%
Hardness 125 Ball Indentation
Elongation 40%
Maximum Operating Temperature +180°C
2 In stock for delivery within 2 working days
Unit of sale: 1 Lot of 1
64.77
(exc. VAT)
79.67
(inc. VAT)
Lot(s)
1 - 2
€64.77
3 - 5
€60.24
6 - 11
€56.99
12 +
€51.82
Related Products
Macor® is a registered trademark of Corning Inc ...
Description:
Macor® is a registered trademark of Corning Inc For the manufacture of precision components utilising ordinary metalworking tools No post firing required Non-wetting, 0% porosity and no deformation Max no load temperature: 1000°CContinuous operating temperature: 800°CMachining tolerances approach 0.013mm (polished ...
Typical applications include valve seats in steam and ...
Description:
Typical applications include valve seats in steam and water mixers, components in a high temperature diesel engine turbo actuators etc Continuous working temperature approx 250°CNo significant degradation in steam or high pressure water environments Can absorb over 1000 Mrads of ...
Environmental: Glass filled Nylon 66 is unaffected by ...
Description:
Environmental: Glass filled Nylon 66 is unaffected by ultra-violet light Strong acids (pH>3) will cause dimensional change due to absorption. Strong alkalis (pH>11) have no affect. Hot water and chlorinated hydrocarbons produce signs of mild attack by absorption. High temperature ...
Easily welded/bonded Very good electrical insulation Easily machined/polished ...
Description:
Easily welded/bonded Very good electrical insulation Easily machined/polished Not resistant long term to hot water (60°C)High storage stiff thermoplastic Excellent sliding properties/wear and abrasion resistant Acid, solvent and chemical resistant For all bearing, bush, gear, insulator applications Opaque