RS PRO Automatic R 3/8 240V Pneumatic Drain Valve Brass, 123 x 96mm IP65, 0 → 16bar

  • RS Stock No. 725-125
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): IE
Product Details

Automatic Drain Valve - 240V 50Hz

Introducing the RS automatic and fully programmable drain valves that are designed to provide automatic draining of filter bowls, separators, receivers and other components. The automatic drain is effective at removing condensate and contaminants. The interval time for draining or discharge can be pre-set to meet the requirements of your pneumatic installation.

Features and Benefits:

• Precise self-activated control of fluids and air to a specified programme (media: air, gases, water, oil etc.)
• Automatically opens for a set time to drain condensation
• Length of time open (0.5 to 45 minutes) and frequency both adjustable
• Discharge time 0.5 to 10 seconds
• Minimal risk of internal blockages due to increased internal tolerances
• LED indicator for operational status
• Test facility for manual override
• IP65 timer and solenoid protection, including the connector
• Timer/Solenoid -20 to +40 : Valve Ambient -10 to +50 : Valve Fluid -10 to +80 °C
• 3 years warranty

Typical Applications:

A drain valve is an integral and one of the most important parts of the compressed air system. A condensate drain valve is responsible for removing condensate from the air system without losing excessive compressed air and without letting the system to shut down due to lack of pressure. Condensate is very harmful to air systems when not removed properly. Moisture can cause a series of problems e.g.

• washing oils and greases from production equipment, machinery and tools resulting in repairs and downtime
• inconsistent supplying of dry air causes production quality issues
• excessive rust caused by humidity within the air system can form scale in the air distribution systems

Drain Valves are used in compressed air systems where liquid, gas, or slurries need to be drained from the system.


  • We do not advise contact with corrosive material
Attribute Value
Manufacturer Series V9112
Drain Type Automatic
Inlet Port R 3/8
Outlet Port R 3/8
Supply Voltage 240V
Body Material Brass
Seal Material Nitrile Rubber
Dimensions 123 x 96mm
IP Rating IP65
Inlet Port Thread Standard R
Height 123mm
Outlet Port - Thread Size 3/8in
Minimum Operating Pressure 0bar
Maximum Operating Pressure 16 bar
Width 96mm
Outlet Port - Thread Standard R
Inlet Port - Thread Size 3/8in
2 Within 1 working day(s) (IE stock)
16 Within 2 working day(s) (EU stock)
Unit of sale: Each
(exc. VAT)
(inc. VAT)
Per unit
1 - 4
5 - 9
10 +
Related Products
The Norgren 40μm pneumatic filter regulator has a ...
The Norgren 40μm pneumatic filter regulator has a G 1/2in port connection with an RC thread standard and a maximum operating pressure of 10bar The regulator has an aluminium body and a bonnet, a brass valve and a polycarbonate bowl ...
A 240V two port zone valve for use ...
A 240V two port zone valve for use in heating systems to isolate zones or equipment Powered open with spring return. Easy to use, clip-on detachable head Pre-moulded plug and play cable supplied to connect to motorised head Metal manual ...
Long life reliability Float type auto drain with ...
Long life reliability Float type auto drain with normally open valve Bowl capacity 400cc/min (07MPa water discharge)Temperature range -5°C to +60°CNo risk of back pressure Easy operation and maintenance.
A fully automatic drip leg drain for removing ...
A fully automatic drip leg drain for removing liquids from pneumatic/compressed air systems Manufactured from zinc alloy with a transparent polycarbonate bowl. A G1/8 connection on the bottom of the bowl allows the collected liquids to be piped away and ...