ProMinent Electric Operated Positive Displacement Pump, 19.1L/h, 10 bar, 100 to 230 V

  • RS Stock No. 121-8596
  • Mfr. Part No. DLTA1020PVT2000U11131EN0
  • Manufacturer ProMinent
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

Delta® 4 Solenoid Diaphragm Metering Pump

Solenoid diaphragm metering pump with optoDrive® drive technology. Complete control of the suction and pressure stroke for optimal adaptation to the metering task and monitoring of the peripheral hydraulic instruments via optoGuard®. The suction and pressure strokes are fully monitored and can be adapted to the individual application. The delta pump is equipped for almost any application thanks to numerous drive options and connection via Profibus® or CANbus to the central control station. The pump is equipped with the option “Process Timer" and can be used as a control centre where programmable logic controllers would normally be required.

Features and Benefits

PVDF liquid end with PTFE seals, resistant to most chemicals
Programmable suction and delivery stroke duration
Continuous or pulsation dosing
Integrated injection control optoGaurd detects blocked dosing points, broken dosing lines and air or gas bubbles
Pump can be adapted to the dosed media
Foot valve and injection valve
Two-stage, float-type level switch input
Fault indicating relay
External control via 0/4-20 mA and volt free contact
Universal control cable 5m
Suction lift: 3mWG
2m suction tube, 5m discharge tube
Integral bleed function
IP65 housing
Supply voltage 100 - 230 V ±10 %, 50 / 60 Hz


The Delta arange of dosing pumps are suitable for use in a broad range of aplications including,
Laboratory chemical monitoring
Cooling water circuits
Metering disinfectants
Paper industry de-foamers
General water treatments
Metering for PH correction dosing
Metering of chemicals and disinfectants

Metering/Dosing Pumps

For use in the chemical, pharmaceutical and food/drinks industries. All have IP65 glass fibre reinforced housings, solenoid drive mechanisms and LCD displays. A comprehensive user manual is supplied with each model.

Attribute Value
Drive Type Electric
Maximum Flow Rate 19.1L/h
Maximum Working Pressure 10 bar
Input Connection 3/4 in G
Output Connection 3/4 in G
IP Rating IP65
Series DLTa
Maximum Fluid Temperature +20°C
Body Material PVDF
Supply Voltage 100 to 230 V
Input Power 78 (Consumption)W
Wetted Materials PVDF
Output Thread Standard or Connection Type G
Input Thread Standard or Connection Type G
Input Connection Size 3/4in
Output Connection Size 3/4in
Temporarily out of stock - back order for despatch when stock is available
Unit of sale: Each
(exc. VAT)
(inc. VAT)
Per unit
1 +
Related Products
The Hanna Instruments black stone BL-series dosing pump ...
The Hanna Instruments black stone BL-series dosing pump uses a minimum number of moving parts, therefore reducing the chance of mechanical failure Its maximum flow rate is 10.8l/hour. The external flow control (the potentiometer) on the front of the pump ...
The Pro Minent S1Cb diaphragm electric operated positive ...
The Pro Minent S1Cb diaphragm electric operated positive displacement pump Sigma/1 of 42L/h flow rate, 10bar, 12bar working pressure and 230VAC electrical rating The entire sigma control product range is equipped with intelligent features to provide a high level of ...
Safe: In the event of an accident, the ...
Safe: In the event of an accident, the feed chemical does not escape to the outside nor into the pump's power end, thanks to the patented multi-layer safety diaphragm with optical (optionally electric) signallingIntegrated relief valve protects the pump against ...
Air pilot type process pump Discharge rate 1 ...
Air pilot type process pump Discharge rate 1 to 20ℓ /min Compact, large capacity Easy maintenance due to structural design that allows the diaphragm andcheck valve to be replaced individually2 to 5 time longer life than that of conventional pumps ...