Ansmann Powerbank 10.8 10.8Ah 5V Power Bank Portable Charger

  • RS Stock No. 135-0999
  • Mfr. Part No. 1700-0067-520
  • Manufacturer Ansmann
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

Ansmann Power Bank

The Ansmann power bank 10.8 has a lithium polymer battery with 10800mAh capacity. It has an output electrical rating of 5V and maximum 2.4A. This device is enabled with 5 LEDs that indicate the charge state in 20% steps during charge and discharge when the button is pressed. Multi-safe technology provides overcharge protection, over-discharge protection, and short circuit protection. This offers additional battery power for a variety of mobile devices where electricity is not available. It is a spare battery for smartphones.
Inclusions:
USB to micro USB cable.

Features and Benefits

2 ´ USB output ports
Approximately 9 hours charging time (depending on the charge current)
Black colour plastic material housing
Compatible with all USB devices that have a 5V input voltage
Input supply is micro USB, 5VDC 1000mA
Length of 123mm, a width of 71mm, and height of 19mm
Operating temperature ranges between 0°C and 45°C

Specifications
Attribute Value
Capacity 10.8Ah
Number of USB Ports 2
Input Connector Micro USB
Output Connectors USB
Output Voltage 5V
Maximum Output Current 2.4A
Number Of Devices Supported 2
Model Number Powerbank 10.8
Depth 19mm
Width 71mm
Length 123mm
4 Within 1 working day(s) (IE stock)
161 Within 2 working day(s) (EU stock)
Unit of sale: Each
24.74
(exc. VAT)
29.94
(inc. VAT)
units
Per unit
1 +
€24.74
Related Products
Adjustable Top slider allows any lithium block battery ...
Description:
Adjustable Top slider allows any lithium block battery to be inserted up to a maximum depth of 50mm across the length where the power terminals are located Sliding contacts allow any battery to be connected. Auto polarity correction – ie ...
The Friwo battery charger is 4 cells 2000mA ...
Description:
The Friwo battery charger is 4 cells 2000mA Li-ion charger It has an output voltage rating of 16.8V and efficiency is 75% at full load. This charger has a universal output plug system. • Constant voltage, current limited• Continuously short ...
step charge control with current detection Universal input ...
Description:
step charge control with current detection Universal input voltage (90-264 VAC)Wake up and low current start-up of deeply discharged batteries With NTC input on request Error indication for reverse polarity, short circuit, charging battery packswith wrong number of cells and ...
3 stage charge control with current detection as ...
Description:
3 stage charge control with current detection as charge termination Medical approved (EN 60601)Universal input voltage (90-264Vac)2-pin IEC 320 input connection21x5.5x12mm output connector (mating connector 656-3901 for 2.1mm straight in line socket to 1.8m unterminated cable, sold separately)For direct connection ...