Maxim MAX14912AKN+ 8 Power Switch IC, High Side Switch / Push-Pull Driver 56-Pin, QFN

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

The MAX14912/MAX14913 have eight 640mA smart high-side switches that can also be configured as push-pull drivers for high-speed switching. The propagation delay from input to switching of the high-side/low-side drivers is 1μs (max). Each high-side driver has a low on-resistance of 230mΩ (max) at 500mA load current at TA = 125°C. The device is configured and controlled either through pins or the SPI interface. The SPI interface is daisy-chainable, which allows efficient cascading of multiple devices. SPI also supports command mode, for the highest detailed diagnostic information.

Low Power and Heat Dissipation
High-Efficiency
Fast Switching Ideal for High-Speed Control Systems
Fast Inductive Load Demagnetization
Robust Operation
Robust SPI Interface with Watchdog and CRC
Open-Wire Detection in High-Side Mode
Low Supply Voltage Warning
Undervoltage Detection
Overvoltage Detection on OUT
Overcurrent Detection
LED Drivers for Visual Fault and Output State Indication

Note

Please note that any defect or non – conformance of this product must be discovered and reported to RS within 20 days of purchase.

Specifications
Attribute Value
Power Switch Type High Side Switch / Push-Pull Driver
Power Switch Topology High Side
Switch On Resistance 230mΩ
Number of Channels 8
Maximum Operating Supply Voltage 36 V
Maximum Operating Current 1.5 A, 22 A
Mounting Type Surface Mount
Package Type QFN
Pin Count 56
Maximum Operating Temperature +125 °C
Minimum Operating Temperature -40 °C
Dimensions 8.1 x 8.1 x 0.85mm
Series MAX1491
79 In stock for delivery within 2 working days
Unit of sale: Each
10.86
(exc. VAT)
13.36
(inc. VAT)
units
Per unit
1 - 9
€10.86
10 - 24
€10.64
25 - 49
€9.60
50 - 99
€9.23
100 +
€9.01
Packaging Options:
Related Products
The STMPS21xx power distribution switches are intended for ...
Description:
The STMPS21xx power distribution switches are intended for applications with expected heavy capacitive loads and short circuits 90 mΩ high-side MOSFET switch500 mA continuous current for STMPS2141, STMPS21511000 mA continuous current for STMPS2161Thermal and short circuit protection with overcurrent logic ...
Integrated High-side and Low-side Intelligent Power Switching circuits ...
Description:
Integrated High-side and Low-side Intelligent Power Switching circuits incorporating many functional and protective features such as over-current, over-voltage, short-circuit, open-circuit load, over-temperature and supply reversal These highly integrated devices utilise low on-resistance MOSFET transistors to ...
The STMPS21xx power distribution switches are intended for ...
Description:
The STMPS21xx power distribution switches are intended for applications with expected heavy capacitive loads and short circuits 90 mΩ high-side MOSFET switch500 mA continuous current for STMPS2141, STMPS21511000 mA continuous current for STMPS2161Thermal and short circuit protection with overcurrent logic ...
60 V, 15 A PNP BISS loadswitch, PNP ...
Description:
60 V, 15 A PNP BISS loadswitch, PNP low VCEsat Breakthrough In Small Signal (BISS) transistor and NPN Resistor- Equipped Transistor (RET) in a SOT457 (SC-74) small Surface-Mounted Device (SMD) plastic package. Low VCEsat (BISS) and resistor-equipped transistor in one ...