Druck ATEX Gauge for Fluid Pressure Sensor, 10bar Max Pressure Reading , 9 → 30 V dc, G1/4, IP65

  • RS Stock No. 229-6540
  • Mfr. Part No. X610-11G-1300
  • Manufacturer Druck
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Druck Precision Pressure Transmitters

Forming part of Druck’s PTX 600 series, this range of pressure transmitters offer a high level of stability, measurement accuracy and stability. Created and designed for critical applications within industrial and research environments, featuring proven silicon technology that has been developed to provide a miniature micro-machined diaphragm. These gauge style pressure sensors are the perfect solution for continuous monitoring in hazardous environments.

Features & Benefits

• Metal seal assembly provides exceptional thermal and stress isolation
• Two-wire electronics includes power supply regulation and amplifier stages
• Independent zero and span controls, zero offset and span setting ±5% site adjustable by sealed, noninteracting potentiometers
• Reverse polarity and over-voltage protection
• RFI bulkhead provides feedthrough filters within the body tube assembly
• The PTX 600 series has a range of 1.5 (100 mbar) through to 10,000 psi (700 bar)
• Rugged compact design
• Great protection against electrical interference
• The transmitter provides an integral female pressure port - 1/4" NPT female
• Fluids compatible with a fully welded assembly of 316 stainless steel and Hastelloy C276 (NACE compatible grades)
• The overall length is 139mm and a diameter of 38mm
• DIN 43650 electrical connector is supplied
• Comprised of hardwearing, aesthetically pleasing stainless steel
• Suitable for use within Zone "O" Gas Group IIC, Temperature Class T4
• G'BSP connection
• Transmitter Supply Voltage: 9-30VDC
• Output Current: 4-20mA (2 wire configuration)
• Temperature effects: less than 0.5% FS over 15° to +122°F- typically 0.3% FS, 15° to +122°
• Gauge configuration (sealed gauge for pressure above 1000 PSI - Absolute for 11.5 to 17 PSI model)

Did you know?

If a product is intrinsically safe, it means that it is incapable of releasing sufficient electrical and thermal energy under normal or abnormal conditions. This results in the item not being able to cause ignition of a specific hazardous atmospheric mixture in its most easily ignited concentration.

Note

Supplied with instruction leaflet, a copy of certificates are available upon request

Specifications
Attribute Value
Pressure Reading Type Gauge
Minimum Pressure Reading 0bar
Maximum Pressure Reading 10bar
Accuracy ±0.08 %
Output Type Analogue
Media Measured Fluid
Process Connection G1/4
Calibrated RSCAL
Electrical Connection DIN 43650 Type A
Analogue Output 4 → 20 mA
Supply Voltage 9 → 30 V dc
Housing Material Stainless Steel
IP Rating IP65
Maximum Operating Temperature +50°C
Hazardous Area Certification ATEX
Minimum Operating Temperature -10°C
Temporarily out of stock - back order for despatch 18-02-2020, delivery within 1 working days
Unit of sale: Each
974.31
(exc. VAT)
1,198.40
(inc. VAT)
units
Per unit
1 +
€974.31
Related Products
The Honeywell Model 53 load cells are bonded ...
Description:
The Honeywell Model 53 load cells are bonded foil strain gage transducers designed for cost efficient production and testing applications These models provide engineered compression force measurements up to 50,000 lb. The precision gaging techniques and a stainless steel construction ...
Allen-Bradley 836P series solid-state pressure sensors are capable ...
Description:
Allen-Bradley 836P series solid-state pressure sensors are capable of measuring pressure of liquid or gases in a rugged, compact housing The 836P sensors feature embedded IO-Link 1.1 communication protocol, which allows for easy integration while delivering data directly into a ...
Epcos AK2 series gauge pressure transducers feature a ...
Description:
Epcos AK2 series gauge pressure transducers feature a robust stainless steel and plastic casing and piezoresistive MEMS technology The mV output is directly proportional to applied pressure, and ratiometric to the supply voltage. Dual in-line package for PCB mounting.
These miniature Surface Mount Technology (SMT) Low Pressure ...
Description:
These miniature Surface Mount Technology (SMT) Low Pressure Sensors are small, cost effective devices intended for use with wet/wet differential sensing Based on the long established reliability and accuracy of the single in-line package, the SMT version’s smaller configuration reduces ...