Telemecanique Sensors Pressure Switch, 0bar Min, 10bar Max, Analogue Output

The Telemecanique sensors pressure sensor is an analogue thread mount type sensor. It integrates a ceramic pressure measuring cell. Ceramic technology has been used successfully for many years and offers a high level of sensitivity that is particularly suitable for measuring low pressures. Ceramic also provides good resistance to abrasive fluids. This pressure sensor is rated at less than 9bar or 100psi. The range of this sensor is Osisense XM. It has load short-circuit reverse polarity protection. This product content's weight is 0.106kg. The ambient air temperature for operation is between -30°C and 85°C. The ambient air temperature for storage is between -50°C and 100°C. An internal fluorocarbon rubber gasket provides the seal between the ceramic measuring cell and the AISI 316L stainless steel casing. XMLP pressure transmitters are rated greater than or equal to 9bar or 100 psi. These transmitters integrate a metal pressure measuring cell. This measuring cell is welded directly onto the AISI 316L stainless steel.

• Accuracy ±0.5 (measurement) %,0.1%
• Analogue output 0.5V to 4.5V
• Electrical connection EN 175301-803-A 3-pin male connector
• Housing material FPM, stainless steel 316L
• Maximum current 7mA
• Maximum pressure reading 10bar
• Media measured air, fresh water, gas, hydraulic oil, refrigeration fluid, etc.
• Minimum pressure reading 0bar
• Mounting type is thread mount
• Response time2 ms
• Supply voltage 5 VDC

• Air compressors
• All pneumatic or hydraulic industrial systems
• HVAC
• Irrigation
• Machine tools
• Mobile cranes
• Moulding machines
• Railway
• Stamping machines
• Vacuum formers
• Water pumping and treatment

• CE certified
• CULus
• EAC
• RCM
. IP65 rated