ADAFRUIT Feather 32u4 Adalogger MCU Development Board with ATmega32u4 - 2795

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Adafruit Feather 32u4 Adalogger Board

The Adafruit Feather 32u4 Adalogger has all the basic features shared by all the Feather 32u4 range together with a datalogger. Where there is a prototyping area on the basic board (RS 124-5521) there is now a micro-SD card holder to write the data to. Pin #8 has a green LED so you can indicate reading and/or writing to the card.

Adafruit Feather 32u4 Development Boards

The Feather 32u4 is a range of development boards from Adafruit. They are powered by the Atmel ATmega32u4 microcontroller clocked at 8 MHz with 3.3 V logic. This chip has 32K of flash and 2K of RAM and built-in USB. As a result it has a USB-to-Serial programme and debug capability built in and it can also act like a mouse, keyboard, USB MIDI device.

This chip is supported in the Arduino IDE and can run nearly every sensor/library available.

The Feather is perfect for small or portable projects. There is a connector for 3.7 V Lithium polymer batteries and built-in battery charging circuit which you can use to measure and monitor battery levels. Lithium Polymer battery and USB cable not included.

Supplied fully assembled and tested, with a USB bootloader that lets you quickly use it with the Arduino IDE.

- 51 x 23 x 8 mm / 2.0" x 0.9" x 0.28" (without headers)
- 4.8 grams
- 3 V regulator with 500 mA peak current output
- 20 GPIO pins
- Hardware serial, hardware I²C, hardware SPI support
- 8 x PWM pins
- 10 x analogue inputs (one is used to measure the battery voltage)
- Built in 100 mA lithium polymer charger with charging status indicator LED
- Pin #13 red LED
- Power/enable pin
- 4 mounting holes
- Reset button

Specifications
Attribute Value
Classification Development Board
Kit Name Feather 32u4 Adalogger
Technology MCU
Processor Part Number ATmega32u4
Processor Type MCU
Temporarily out of stock - back order for despatch 13-05-2020, delivery within 2 working days
Unit of sale: Each
19.60
(exc. VAT)
24.11
(inc. VAT)
units
Per unit
1 +
€19.60
Related Products
The Cypress Semiconductor prototyping kit enables you to ...
Description:
The Cypress Semiconductor prototyping kit enables you to evaluate and develop systems based on Arm Cortex-M0 core It features the Cypress' fourth-generation capacitive sensing solution that efficiently works in noisy environments and the presence of liquids. This kit is designed ...
Description:
The SmartGLCD 240 x 128 is a compact smart monochrome display module with on-board microcontroller and many on-board peripherals 240 x 128 pixel monochrome graphic LCD with 4-wire resistive touchscreen Programmable RGB LED backlight with more than 16million different colours ...
The Click accessory modules plug into the MikroBUS ...
Description:
The Click accessory modules plug into the MikroBUS sockets in Mikro Elektronika microcontroller development boards MPU IMU click has an MPU-6000 device that combines a 3-axis gyroscope, 3-axis accelerometer and a DMP (Digital Motion Processor) on a single chip. MPU-6000 ...
This is a target board used for evaluating ...
Description:
This is a target board used for evaluating the Renesas RL78/G1G microcontroller variant Applications include small domestic appliances with BLDC motors. 24MHz R5F11EFAA microcontroller, 16KB Flash memory, 1.5KB RAM35 x CMOS GPIO ports and 5 x CMOS Input ports20MHz resonator32768Hz ...