Sipeed MAix BiT for RISC-V AI+IoT

  • RS Stock No. 188-7079
  • Mfr. Part No. 102991150
  • Manufacturer Seeed Studio
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

MAIX is Sipeed’s purpose-built module designed to run AI at the edge, we called it AIoT. It delivers high performance in a small physical and power footprint, enabling the deployment of high-accuracy AI at the edge, and the competitive price make it possible embed to any IoT devices. As you see, Sipeed MAIX is quite like Google edge TPU, but it act as master controller, not an accelerator like edge TPU, so it is more low cost and low power than AP+edge TPU solution.

It is twice of M1 size, 1x2 inch size, breadboard-friendly, and also SMT-able
It integrate USB2UART chip, auto download circuit, RGB LED, DVP Camera FPC connector(support small FPC camera and standard M12 camera), MCU LCD FPC connector(support our 2.4 inch QVGA LCD), TF card solt.
MAix BiT is able to adjust core voltage you can adjust from 0.8V∼1.2V, overclock to 800MHz

Specifications
Attribute Value
Classification Development Board
Kit Name Sipeed MAIX BiT for RISC-V AI+IoT
Processor Part Number CH552
Processor Type MCU
Temporarily out of stock - back order for despatch 22-07-2020, delivery within 2 working days
Unit of sale: Each
15.20
(exc. VAT)
18.70
(inc. VAT)
units
Per unit
1 +
€15.20
Related Products
The Digilent Pmod AD1 is a two-channel, 12-bit ...
Description:
The Digilent Pmod AD1 is a two-channel, 12-bit ADC module featuring the Analog Devices AD7476A device • Simultaneous A/D conversion at up to 1MSPS per channel• Dual 2-pole Sallen-Key anti-alias filters• Host communication: SPI bus• 6-pin Pmod connector with GPIO ...
The Pmod DA2 is a dual 12-bit Digital-to-Analogue ...
Description:
The Pmod DA2 is a dual 12-bit Digital-to-Analogue converter module featuring the Texas Instruments DAC121S101 device • 2 x simultaneous conversion channels• Settling time: 8μs• Power down mode• Host communication: serial• 6-pin Pmod connector with GPIO interface• Dimensions: 25 x ...
The Pmod ACL2 is a 3-axis MEMS accelerometer ...
Description:
The Pmod ACL2 is a 3-axis MEMS accelerometer module featuring the Analog Devices ADXL362 device • Measurement ranges: ±2g, ±4g, ±8g• Up to 12-bit resolution on each axis• User-selectable resolution• Free-fall detection• 512-sample FIFO buffer• Host communication: SPI bus• Follows ...
The Pmod AMP3 module features the Analog Devices ...
Description:
The Pmod AMP3 module features the Analog Devices SSM2518 digital-input 2W Class-D stereo audio power amplifier device • Stereo speaker output via 2 x 3.5mm jack sockets• Supports common I²S audio formats• Digitally configurable volume control for each channel• Dynamic ...