Loctıte Grey High Strength, Retaining Compound Gel Tube 50 ml, -55 → +150 °C LOCTITE Quick-Metal 660

  • RS Stock No. 517-7420
  • Mfr. Part No. 66046
  • Manufacturer Loctite
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): IE
Product Details

Loctite® 660 Quick Metal

A single component retaining adhesive/sealant.

Non-metallic, non-running anaerobic paste which only cures between active metal surfaces
Product hardens into a tough plastic which is resistant to solvents and lubricants
Fills voids between parts to prevent fretting, wear, corrosion and backlash
For use on worn metal parts eg. shafts, housings, keyways, splines and bushings
Loctite Activator N7649, stock no. 108-716 is recommended to speed up cure and promote cure through large volume gaps up to 20 thou.

Threadlocking and Retainers

Specifications
Attribute Value
Trade Name Loctite Quick-Metal 660
Application Bonding, Retaining
Anaerobic Yes
Colour Grey
Product Form Gel
Package Type Tube
Package Size 50 ml
Strength High
Maximum Operating Temperature +150°C
Minimum Operating Temperature -55°C
Chemical Composition Urethane Methacrylate
Operating Temperature Range -55 → +150 °C
15 Within 2 working day(s) (EU stock)
21 Within 2 working day(s) (EU stock)
Unit of sale: Each
55.42
(exc. VAT)
68.17
(inc. VAT)
units
Per unit
1 - 5
€55.42
6 - 14
€53.21
15 +
€52.09
Related Products
3M™ Hybrid Adhesive Sealant 760 is a single ...
Description:
3M™ Hybrid Adhesive Sealant 760 is a single component, high strength, elastomeric sealant. This hybrid technology is paintable when wet and will not degrade when exposed to UV. Excellent adhesionPaintable when wetAbove/below water line useLow VOC30 Minute skin time.
A good general purpose sealant/adhesive that seals, bonds ...
Description:
A good general purpose sealant/adhesive that seals, bonds and fixes almost anything. High performance MS Polymer sealant/adhesiveCan be used on wood, stone, metal, glass, plasterboard, ,tiles, brick, plastic and most other building materialsHigh tack – rapid curingWeather resistant and damp ...
The RS Pro metal epoxy putty is the ...
Description:
The RS Pro metal epoxy putty is the perfect solution when you want to repair or rebuild your metal applications. Can be machined, ground, drilled filed and painted after 60 minutesResistant to water, chemicals and temperature extremesSaves cost of expensive ...
For flexible plastic and plastic to metal fittingsLow ...
Description:
For flexible plastic and plastic to metal fittingsLow strengthLow pressure instant seal; 0.5 bar on 1 inch fittingsWater Research Council approved (hot and cold water)Cures within 12 hoursSealing capacity up to 3 bar in water at 90°C.