HopeRF RFM63W-868S2 RF Transceiver Module 868 MHz, 2.1 → 3.6V

  • RS Stock No. 793-2008
  • Mfr. Part No. RFM63W-868S2
  • Manufacturer HopeRF
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CN
Product Details

RFM63 868MHz ISM Transceiver, HopeRF

The RFM63W is a low-cost 868MHz ISM-band transceiver module. The RFM63W is optimized for very low power consumption. All major RF communication parameters are programmable and most of them may be dynamically set. In order to better use RFM63W modules, this specification also involves a large number of the parameters and functions of its RF63 core chip, including those IC pins which are not leaded out. All of these can help customers gain a better understanding of the performance of RFM63W modules.

Carrier Frequency range: 865 to 871MHz
RF Output Power: 12dBm
Modulation: FSK or OOK
Receiver Sensitivity: -105dBm at 25kbps in FSK, -111dBm at 2kbps in OOK
Rx power consumption: 3mA
Tx power consumption: 25mA @ +10dBm
Programmable RF output power: up to +12dBm in 8 steps
Packet handling feature with data whitening and automatic CRC generation
Wide RSSI (Received Signal Strength Indicator) dynamic range, 70dB from Rx noise floor
Data rate: Up to 200kbps with NRZ coding
On-chip frequency synthesizer
Incoming sync word recognition
Built-in Bit-Synchronizer for incoming data and clock synchronization and recovery
Power supply: +2.1 to +3.6Vdc
Operating temperature range: -20 to +70°C
Dimensions: 19.7 x 16 x 1.9mm
Optimized Circuit Configuration for low-cost application
Applications: Wireless alarm & security systems, Wireless sensor networks, Automated Meter Reading, Home & Building automation, Industrial monitoring & control, Remote Wireless Control , Local communication for the Internet-of-Things (IoT)

Wireless Modules - HopeRF

Specifications
Attribute Value
Module Type Transceiver
Supported Frequency Bands 868MHz
Modulation Technique FSK, OOK
Maximum RF Data Rate 200kbit/s
Maximum Output Power +10dBm
Receiver Sensitivity -111dBm
Supported Bus Interfaces SPI
Supply Voltage 2.1 → 3.6V
Dimensions 19.7 x 16 x 1mm
Height 1.9mm
Length 19.7mm
Maximum Operating Temperature +70 °C
Minimum Operating Temperature -20 °C
Width 16mm
Temporarily out of stock - back order for despatch 24-11-2020, delivery within 2 working days
Unit of sale: Each
6.96
(exc. VAT)
8.42
(inc. VAT)
units
Per unit
1 - 4
€6.96
5 - 9
€6.33
10 +
€6.16
Related Products
The ZETA modules are cost-effective high-performance sub-1GHz ISM ...
Description:
The ZETA modules are cost-effective high-performance sub-1GHz ISM band radio modules based on EZRadio® technology and the Si4455 RF transceiver chip RF Operating Frequency: 433/868MHz ISM bandRF Output Power: up to +13d BmReceiver Sensitivity: -116d Bm @ 2.4kbps, GFSK, 0.1% ...
The ZETAPLUS Smart module is a Radio Transceiver ...
Description:
The ZETAPLUS Smart module is a Radio Transceiver with SPI (Serial Peripheral Interface) and UART interface A highly tuned RF matching network achieves range of 2 kilometres. It features a 64-byte transmit/receive FIFO and has low current consumption for the ...
The RFM9xW Transceiver Modules feature the Semtech SX1272 ...
Description:
The RFM9xW Transceiver Modules feature the Semtech SX1272 transceiver chip which uses a variation of Chirp Spread Spectrum coding called Lo Ra™, to improve receiver sensitivity and hence achieve extended range The module can also use OOK and FSK modulation ...
The eRAx00TRS is a complete system-on-module that combines ...
Description:
The eRAx00TRS is a complete system-on-module that combines a high performance very low power RF ISM-Band transceiver, a microcontroller and a voltage regulator Two modules make a bi-directional half-duplex serial data communication link based on the easy Radio protocol with ...